As pointed out by Michael Paquier, recovery_min_apply_delay didn't exist
in 9.0-9.3, making the release note text not very useful.  Instead make it
talk about recovery_target_xid, which did exist then.

9.0 is already out of support, but we can fix the text in the newer
branches' copies of its release notes.

Backpatch certain files through 9.1

flatten_reloptions() supposed that it didn't really need to do anything
beyond inserting commas between reloption array elements.  However, in
principle the value of a reloption could be nearly anything, since the
grammar allows a quoted string there.  Any restrictions on it would come
from validity checking appropriate to the particular option, if any.

A reloption value that isn't a simple identifier or number could thus lead
to dump/reload failures due to syntax errors in CREATE statements issued
by pg_dump.  We've gotten away with not worrying about this so far with
the core-supported reloptions, but extensions might allow reloption values
that cause trouble, as in bug #13840 from Kouhei Sutou.

To fix, split the reloption array elements explicitly, and then convert
any value that doesn't look like a safe identifier to a string literal.
(The details of the quoting rule could be debated, but this way is safe
and requires little code.)  While we're at it, also quote reloption names
if they're not safe identifiers; that may not be a likely problem in the
field, but we might as well try to be bulletproof here.

It's been like this for a long time, so back-patch to all supported
branches.

Kouhei Sutou, adjusted some by me

A report from Andy Colson showed that gincostestimate() was not being
nearly paranoid enough about whether to believe the statistics it finds in
the index metapage.  The problem is that the metapage stats (other than the
pending-pages count) are only updated by VACUUM, and in the worst case
could still reflect the index's original empty state even when it has grown
to many entries.  We attempted to deal with that by scaling up the stats to
match the current index size, but if nEntries is zero then scaling it up
still gives zero.  Moreover, the proportion of pages that are entry pages
vs. data pages vs. pending pages is unlikely to be estimated very well by
scaling if the index is now orders of magnitude larger than before.

We can improve matters by expanding the use of the rule-of-thumb estimates
I introduced in commit 7fb008c5: if the index has grown by more
than a cutoff amount (here set at 4X growth) since VACUUM, then use the
rule-of-thumb numbers instead of scaling.  This might not be exactly right
but it seems much less likely to produce insane estimates.

I also improved both the scaling estimate and the rule-of-thumb estimate
to account for numPendingPages, since it's reasonable to expect that that
is accurate in any case, and certainly pages that are in the pending list
are not either entry or data pages.

As a somewhat separate issue, adjust the estimation equations that are
concerned with extra fetches for partial-match searches.  These equations
suppose that a fraction partialEntries / numEntries of the entry and data
pages will be visited as a consequence of a partial-match search.  Now,
it's physically impossible for that fraction to exceed one, but our
estimate of partialEntries is mostly bunk, and our estimate of numEntries
isn't exactly gospel either, so we could arrive at a silly value.  In the
example presented by Andy we were coming out with a value of 100, leading
to insane cost estimates.  Clamp the fraction to one to avoid that.

Like the previous patch, back-patch to all supported branches; this
problem can be demonstrated in one form or another in all of them.

Common mathematical convention is that exponentiation associates right to
left.  We aren't going to change the parser for this, but we could note
it in the operator's description.  (It's already noted in the operator
precedence/associativity table, but users might not look there.)
Per bug #13829 from Henrik Pauli.

For some reason, we've been overlooking the fact that pg_receivexlog
and pg_recvlogical are using wrong translation domains all along,
so their output hasn't ever been translated.  The right domain is
pg_basebackup, not their own executable names.

Noticed by Ioseph Kim, who's been working on the Korean translation.

Backpatch pg_receivexlog to 9.2 and pg_recvlogical to 9.4.

Both Blowfish and DES implementations of crypt() can take arbitrarily
long time, depending on the number of rounds specified by the caller;
make sure they can be interrupted.

Author: Andreas Karlsson
Reviewer: Jeff Janes

Backpatch to 9.1.

This is necessary so that REASSIGN OWNED does the right thing with
composite types, to wit, that it also alters ownership of the type's
pg_class entry -- previously, the pg_class entry remained owned by the
original user, which caused later other failures such as the new owner's
inability to use ALTER TYPE to rename an attribute of the affected
composite.  Also, if the original owner is later dropped, the pg_class
entry becomes owned by a non-existant user which is bogus.

To fix, create a new routine AlterTypeOwner_oid which knows whether to
pass the request to ATExecChangeOwner or deal with it directly, and use
that in shdepReassignOwner rather than calling AlterTypeOwnerInternal
directly.  AlterTypeOwnerInternal is now simpler in that it only
modifies the pg_type entry and recurses to handle a possible array type;
higher-level tasks are handled by either AlterTypeOwner directly or
AlterTypeOwner_oid.

I took the opportunity to add a few more objects to the test rig for
REASSIGN OWNED, so that more cases are exercised.  Additional ones could
be added for superuser-only-ownable objects (such as FDWs and event
triggers) but I didn't want to push my luck by adding a new superuser to
the tests on a backpatchable bug fix.

Per bug #13666 reported by Chris Pacejo.

This is a backpatch of commit 756e7b4c to branches 9.1 -- 9.4.

When REASSIGN and ALTER OWNER TO are used, both the object owner and ACL
list should be changed from the old owner to the new owner. This patch
fixes types, foreign data wrappers, and foreign servers to change their
ACL list properly;  they already changed owners properly.

Report by Alexey Bashtanov

This is a backpatch of commit 59367fdf (for bug #9923) by Bruce
Momjian to branches 9.1 - 9.4; it wasn't backpatched originally out of
concerns that it would create a backwards compatibility problem, but per
discussion related to bug #13666 that turns out to have been misguided.
(Therefore, the entry in the 9.5 release notes should be removed.)

Note that 9.1 didn't have privileges on types (which were introduced by
commit 72920557), so this commit only changes foreign-data related
objects in that branch.

Discussion: http://www.postgresql.org/message-id/20151216224004.GL2618@alvherre.pgsql
	http://www.postgresql.org/message-id/10227.1450373793@sss.pgh.pa.us

psql offered USING, WHERE, and SET in this context, but SET is not a valid
possibility here.  Seems to have been a thinko in commit f5ab0a14
which added DELETE's USING option.

Turns out we must set rl_basic_word_break_characters *before* we call
rl_initialize() the first time, because it will quietly copy that value
elsewhere --- but only on the first call.  (Love these undocumented
dependencies.)  I broke this yesterday in commit 2ec477dc;
like that commit, back-patch to all active branches.  Per report from
Pavel Stehule.

It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input.  This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement.  The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.

The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline().  That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible.  A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible.  In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.

It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.

rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that.  (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function.  Fortunately,
libedit seems not to have any corresponding bug.

Merlin Moncure, adjusted a bit by me

Apparently, there are bugs in this code that cause it to loop endlessly.
That bug still needs more research, but in the meantime it's clear that
the loop is missing a check for interrupts so that it can be cancelled
timely.

Backpatch to 9.1 -- this has been missing since 49475aab.

If libpq ran out of memory while constructing the result set, it would hang,
waiting for more data from the server, which might never arrive. To fix,
distinguish between out-of-memory error and not-enough-data cases, and give
a proper error message back to the client on OOM.

There are still similar issues in handling COPY start messages, but let's
handle that as a separate patch.

Michael Paquier, Amit Kapila and me. Backpatch to all supported versions.

e3f4cfc7 introduced a LWLockHeldByMe() call, without the corresponding
Assert() surrounding it.

Spotted by Coverity.

Backpatch: 9.1+, like the previous commit

This has worked that way for a long time, maybe always, but you would
not have known it from the documentation.  Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.

Paul Ramsey

Changing the tablespace of an unlogged relation did not WAL log the
creation and content of the init fork. Thus, after a standby is
promoted, unlogged relation cannot be accessed anymore, with errors
like:
ERROR:  58P01: could not open file "pg_tblspc/...": No such file or directory
Additionally the init fork was not synced to disk, independent of the
configured wal_level, a relatively small durability risk.

Investigation of that problem also brought to light that, even for
permanent relations, the creation of !main forks was not WAL logged,
i.e. no XLOG_SMGR_CREATE record were emitted. That mostly turns out not
to be a problem, because these files were created when the actual
relation data is copied; nonexistent files are not treated as an error
condition during replay. But that doesn't work for empty files, and
generally feels a bit haphazard. Luckily, outside init and main forks,
empty forks don't occur often or are not a problem.

Add the required WAL logging and syncing to disk.

Reported-By: Michael Paquier
Author: Michael Paquier and Andres Freund
Discussion: 20151210163230.GA11331@alap3.anarazel.de
Backpatch: 9.1, where unlogged relations were introduced

Recent releases of libxml2 do not provide error context reports for errors
detected at the very end of the input string.  This appears to be a bug, or
at least an infelicity, introduced by the fix for libxml2's CVE-2015-7499.
We can hope that this behavioral change will get undone before too long;
but the security patch is likely to spread a lot faster/further than any
follow-on cleanup, which means this behavior is likely to be present in the
wild for some time to come.  As a stopgap, add a variant regression test
expected-file that matches what you get with a libxml2 that acts this way.

As reported in bug #13809 by Alexander Ashurkov, the code for REASSIGN
OWNED hadn't gotten word about user mappings.  Deal with them in the
same way default ACLs do, which is to ignore them altogether; they are
handled just fine by DROP OWNED.  The other foreign object cases are
already handled correctly by both commands.

Also add a REASSIGN OWNED statement to foreign_data test to exercise the
foreign data objects.  (The changes are just before the "cleanup" phase,
so it shouldn't remove any existing live test.)

Reported by Alexander Ashurkov, then independently by Jaime Casanova.

This allows sane behavior in a PGXS build done on a machine where build
tools such as bison are missing.

Jim Nasby

At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced52 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.

To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.

Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.

Typical symptoms of this bug are errors like
'ERROR:  index "..." contains unexpected zero page at block 0'
shortly after promoting a node.

Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-

Commit 32f15d05 fixed this in configure, but missed the similar check
in the MSVC scripts.

Michael Paquier, per report from Victor Wagner

In commit 1ea0c73c I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that.  Back-patch to supported versions, like the previous patch.

We tried to fetch statistics data from the index metapage, which does not
work if the index isn't actually present.  If the index is hypothetical,
instead extrapolate some plausible internal statistics based on the index
page count provided by the index-advisor plugin.

There was already some code in gincostestimate() to invent internal stats
in this way, but since it was only meant as a stopgap for pre-9.1 GIN
indexes that hadn't been vacuumed since upgrading, it was pretty crude.
If we want it to support index advisors, we should try a little harder.
A small amount of testing says that it's better to estimate the entry pages
as 90% of the index, not 100%.  Also, estimating the number of entries
(keys) as equal to the heap tuple count could be wildly wrong in either
direction.  Instead, let's estimate 100 entries per entry page.

Perhaps someday somebody will want the index advisor to be able to provide
these numbers more directly, but for the moment this should serve.

Problem report and initial patch by Julien Rouhaud; modified by me to
invent less-bogus internal statistics.  Back-patch to all supported
branches, since we've supported index advisors since 9.0.

The previous coding could overrun the provided buffer size for a very large
input, or lose precision for a very small input.  Adopt the methodology
that's been in use in the equivalent backend code for a long time.

Per private report from Bas van Schaik.  Back-patch to all supported
branches.

Failure to initially palloc the comboCids array, or to realloc it bigger
when needed, left combocid's data structures in an inconsistent state that
would cause trouble if the top transaction continues to execute.  Noted
while examining a user complaint about the amount of memory used for this.
(There's not much we can do about that, but it does point up that repalloc
failure has a non-negligible chance of occurring here.)

In HEAD/9.5, also avoid possible invocation of memcpy() with a null pointer
in SerializeComboCIDState; cf commit 13bba022.

PQhost() can return NULL in non-error situations, namely when a Unix-socket
connection has been selected by default.  That behavior is a tad debatable
perhaps, but for the moment we should make sure that psql copes with it.
Unfortunately, do_connect() failed to: it could pass a NULL pointer to
strcmp(), resulting in crashes on most platforms.  This was reported as a
security issue by ChenQin of Topsec Security Team, but the consensus of
the security list is that it's just a garden-variety bug with no security
implications.

For paranoia's sake, I made the keep_password test not trust PQuser or
PQport either, even though I believe those will never return NULL given
a valid PGconn.

Back-patch to all supported branches.

Also fix getErrorText() to return the right error string on failure.
This behavior now matches that of other operating systems.

Report by Noah Misch

Backpatch through 9.1

I missed adding src/port/tar.c to the Windows build files when
back-patching the addition of that file to 9.2 and 9.1.
Per buildfarm.

The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB.  However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member.  Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB.  (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)

File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.

In addition, this patch fixes several bugs in the same area:

* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.

* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.

* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.

* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.

In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.

The previous way of reconstructing check constraints was to do a separate
"ALTER TABLE ONLY tab ADD CONSTRAINT" for each table in an inheritance
hierarchy.  However, that way has no hope of reconstructing the check
constraints' own inheritance properties correctly, as pointed out in
bug #13779 from Jan Dirk Zijlstra.  What we should do instead is to do
a regular "ALTER TABLE", allowing recursion, at the topmost table that
has a particular constraint, and then suppress the work queue entries
for inherited instances of the constraint.

Annoyingly, we'd tried to fix this behavior before, in commit 5ed6546c,
but we failed to notice that it wasn't reconstructing the pg_constraint
field values correctly.

As long as I'm touching pg_get_constraintdef_worker anyway, tweak it to
always schema-qualify the target table name; this seems like useful backup
to the protections installed by commit 5f173040.

In HEAD/9.5, get rid of get_constraint_relation_oids, which is now unused.
(I could alternatively have modified it to also return conislocal, but that
seemed like a pretty single-purpose API, so let's not pretend it has some
other use.)  It's unused in the back branches as well, but I left it in
place just in case some third-party code has decided to use it.

In HEAD/9.5, also rename pg_get_constraintdef_string to
pg_get_constraintdef_command, as the previous name did nothing to explain
what that entry point did differently from others (and its comment was
equally useless).  Again, that change doesn't seem like material for
back-patching.

I did a bit of re-pgindenting in tablecmds.c in HEAD/9.5, as well.

Otherwise, back-patch to all supported branches.

Per buildfarm member anchovy, 2.6.0 exists in the wild now.
Hopefully it works with Postgres; if not, we'll have to do something
about that, but in any case claiming it's "too old" is pretty silly.

div_var_fast() postpones propagating carries in the same way as mul_var(),
so it has the same corner-case overflow risk we fixed in 246693e5,
namely that the size of the carries has to be accounted for when setting
the threshold for executing a carry propagation step.  We've not devised
a test case illustrating the brokenness, but the required fix seems clear
enough.  Like the previous fix, back-patch to all active branches.

Dean Rasheed

Normally ruleutils prints a whole-row Var as "foo.*".  We already knew that
that doesn't work at top level of a SELECT list, because the parser would
treat the "*" as a directive to expand the reference into separate columns,
not a whole-row Var.  However, Joshua Yanovski points out in bug #13776
that the same thing happens at top level of a ROW() construct; and some
nosing around in the parser shows that the same is true in VALUES().
Hence, apply the same workaround already devised for the SELECT-list case,
namely to add a forced cast to the appropriate rowtype in these cases.
(The alternative of just printing "foo" was rejected because it is
difficult to avoid ambiguity against plain columns named "foo".)

Back-patch to all supported branches.

The error message wording for AttributeError has changed in Python 3.5.
For the plpython_error test, add a new expected file.  In the
plpython_subtransaction test, we didn't really care what the exception
is, only that it is something coming from Python.  So use a generic
exception instead, which has a message that doesn't vary across
versions.

Previously, file copy failures were ignored on Windows due to an
incorrect return value check.

Report by Manu Joye

Backpatch through 9.1

In commit a5ec86a7 I wrote a quick hack
that reduced the number of TeX string pool entries created while converting
our documentation to PDF form.  That held the fort for awhile, but as of
HEAD we're back up against the same limitation.  It turns out that the
original coding of \FlowObjectSetup actually results in *three* string pool
entries being generated for every "flow object" (that is, potential
cross-reference target) in the documentation, and my previous hack only got
rid of one of them.  With a little more care, we can reduce the string
count to one per flow object plus one per actually-cross-referenced flow
object (about 115000 + 5000 as of current HEAD); that should work until
the documentation volume roughly doubles from where it is today.

As a not-incidental side benefit, this change also causes pdfjadetex to
stop emitting unreferenced hyperlink anchors (bookmarks) into the PDF file.
It had been making one willy-nilly for every flow object; now it's just one
per actually-cross-referenced object.  This results in close to a 2X
savings in PDF file size.  We will still want to run the output through
"jpdftweak" to get it to be compressed; but we no longer need removal of
unreferenced bookmarks, so we might be able to find a quicker tool for
that step.

Although the failure only affects HEAD and US-format output at the moment,
9.5 cannot be more than a few pages short of failing likewise, so it
will inevitably fail after a few rounds of minor-version release notes.
I don't have a lot of faith that we'll never hit the limit in the older
branches; and anyway it would be nice to get rid of jpdftweak across the
board.  Therefore, back-patch to all supported branches.

At least OpenBSD, NetBSD, and Windows don't support it.  This repairs
pg_ctl for listen_addresses='0.0.0.0' and listen_addresses='::'.  Since
pg_ctl prefers to test a Unix-domain socket, Windows users are most
likely to need this change.  Back-patch to 9.1 (all supported versions).
This could change pg_ctl interaction with loopback-interface firewall
rules.  Therefore, in 9.4 and earlier (released branches), activate the
change only on known-affected platforms.

Reported (bug #13611) and designed by Kondo Yuta.