The docs claimed that this mode only waits for the standby to receive WAL
data, but actually it waits for the data to be written out to the standby's
OS; which is a pretty significant difference because it removes the risk of
crash of the walreceiver process.

I was unable to entirely resist the temptation to copy-edit related
entries, but will save most of that for a separate pass.

If a view has circular dependencies, pg_dump splits it into a CREATE TABLE
and a CREATE RULE command to break the dependency loop.  However, if the
view has reloptions, those options cannot be applied in the CREATE TABLE
command, because views and tables have different allowed reloptions so
CREATE TABLE would reject them.  Instead apply the reloptions after the
CREATE RULE, using ALTER VIEW SET.

Extraction of trigrams did not process LIKE escape sequences properly,
leading to possible misidentification of trigrams near escapes, resulting
in incorrect index search results.

Fujii Masao

We had put a test for libxml2's xmlStructuredErrorContext variable in
configure, but of course that doesn't work on Windows builds.  The next
best alternative seems to be to test the LIBXML_VERSION symbol provided
by xmlversion.h.

Per report from Talha Bin Rizwan, though this fixes it in a different way
than his proposed patch.

In the initial cut at the "parameterized paths" feature, I'd simplified
create_index_paths() to the point where it would only generate a single
parameterized bitmap path per relation.  Experimentation with an example
supplied by Josh Berkus convinces me that that's not good enough: we really
need to consider a bitmap path for each possible outer relation.  Otherwise
we have regressions relative to pre-9.2 versions, in which the planner
picks a plain indexscan where it should have used a bitmap scan in queries
involving three or more tables.  Indeed, after fixing this, several queries
in the regression tests show improved plans as a result of using bitmap not
plain indexscans.

We use a hash table to track the parents of inner pages, but when inserting
to a leaf page, the caller of gistbufferinginserttuples() must pass a
correct block number of the leaf's parent page. Before gistProcessItup()
descends to a child page, it checks if the downlink needs to be adjusted to
accommodate the new tuple, and updates the downlink if necessary. However,
updating the downlink might require splitting the page, which might move the
downlink to a page to the right. gistProcessItup() doesn't realize that, so
when it descends to the leaf page, it might pass an out-of-date parent block
number as a result. Fix that by returning the block a tuple was inserted to
from gistbufferinginserttuples().

This fixes the bug reported by Zdeněk Jílovec.

The previous coding essentially assumed that nodes would be rescanned in
the same order they were initialized in; or at least that the "leader" of
a group of CTEscans would be rescanned before any others were required to
execute.  Unfortunately, that isn't even a little bit true.  It's possible
to devise queries in which the leader isn't rescanned until other CTEscans
on the same CTE have run to completion, or even in which the leader never
gets a rescan call at all.

The fix makes the leader specially responsible only for initial creation
and final destruction of the tuplestore; rescan resets are now a
symmetrically shared responsibility.  This means that we might reset the
tuplestore multiple times when restarting a plan subtree containing
multiple CTEscans; but resetting an already-empty tuplestore is cheap
enough that that doesn't seem like a problem.

Per report from Adam Mackler; the new regression test cases are based on
his example query.

Back-patch to 8.4 where CTE scans were introduced.

This situation creates a dependency loop that confuses pg_dump and probably
other things.  Moreover, since the mental model is that the extension
"contains" schemas it owns, but "is contained in" its extschema (even
though neither is strictly true), having both true at once is confusing for
people too.  So prevent the situation from being set up.

Reported and patched by Thom Brown.  Back-patch to 9.1 where extensions
were added.

This essentially reverts commit e54b10a6,
in which I'd decided that the "last ditch" join logic was useless.  The
folly of that is now exposed by a report from Pavel Stehule: although the
function should always find at least one join in a self-contained join
problem, it can still fail to do so in a sub-problem created by artificial
from_collapse_limit or join_collapse_limit constraints.  Adjust the
comments to describe this, and simplify the code a bit to match the new
coding of the earlier loop in the function.

I'm not terribly happy about this: I still subscribe to the opinion stated
in the previous commit message that the "last ditch" code can obscure logic
bugs elsewhere.  But the alternative seems to be to complicate the earlier
tests for does-this-relation-have-a-join-clause to the point where they can
tell whether the join clauses link outside the current join sub-problem.
And that looks messy, slow, and possibly a source of bugs in itself.
In any case, now is not the time to be inserting experimental code into
9.2, so let's just go back to the time-tested solution.

libxslt offers the ability to read and write both files and URLs through
stylesheet commands, thus allowing unprivileged database users to both read
and write data with the privileges of the database server.  Disable that
through proper use of libxslt's security options.

Also, remove xslt_process()'s ability to fetch documents and stylesheets
from external files/URLs.  While this was a documented "feature", it was
long regarded as a terrible idea.  The fix for CVE-2012-3489 broke that
capability, and rather than expend effort on trying to fix it, we're just
going to summarily remove it.

While the ability to write as well as read makes this security hole
considerably worse than CVE-2012-3489, the problem is mitigated by the fact
that xslt_process() is not available unless contrib/xml2 is installed,
and the longstanding warnings about security risks from that should have
discouraged prudent DBAs from installing it in security-exposed databases.

Reported and fixed by Peter Eisentraut.

Security: CVE-2012-3488

xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server.  While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.

The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs.  However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string.  A future patch may improve this.

In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs.  Previous
branches don't show such warnings anyway, due to different error handling
arrangements.

Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.

Security: CVE-2012-3489

consultation with word definitions.

Backpatch to 9.2.

DST law changes in Morocco; Tokelau has relocated to the other side of
the International Date Line; and apparently Olson had Tokelau's GMT
offset wrong by an hour even before that.

There are also a large number of non-significant changes in this update.
Upstream took the opportunity to remove trailing whitespace, and the
SCCS-style version numbers on the individual files are gone too.

Jeff Janes

This command generated new pg_depend entries linking the index to the
constraint and the constraint to the table, which match the entries made
when a unique or primary key constraint is built de novo.  However, it did
not bother to get rid of the entries linking the index directly to the
table.  We had considered the issue when the ADD CONSTRAINT USING INDEX
patch was written, and concluded that we didn't need to get rid of the
extra entries.  But this is wrong: ALTER COLUMN TYPE wasn't expecting such
redundant dependencies to exist, as reported by Hubert Depesz Lubaczewski.
On reflection it seems rather likely to break other things as well, since
there are many bits of code that crawl pg_depend for one purpose or
another, and most of them are pretty naive about what relationships they're
expecting to find.  Fortunately it's not that hard to get rid of the extra
dependency entries, so let's do that.

Back-patch to 9.1, where ALTER TABLE ADD CONSTRAINT USING INDEX was added.

directory.

Backpatch to 9.2.

Should be limited to the maximum number of connections excluding
autovacuum workers, not including.

Add similar check for max_wal_senders, which should never be higher than
max_connections.

This prevents spurious attempts to archive xlog files after promotion of
standby, a bug introduced by cascading replication patch in 9.2.

Fujii Masao, simplified and extended to cover streaming by Simon Riggs

Noted by Noah Misch, patch by Fujii Masao

Cascading replication copied the incoming file into pg_xlog but
didn't set path correctly, so the first attempt to open file failed
causing it to loop around and look for file in pg_xlog. So the
earlier coding worked, but accidentally rather than by design.

Spotted by Fujii Masao, fix by Fujii Masao and Simon Riggs

The directions explaining about running the prepared-transactions test
were not updated in commit ae55d9fb.

This was broken in commit ed0b409d,
which revised the GlobalTransactionData struct to not include the
associated PGPROC as its first member, but overlooked one place where
a cast was used in reliance on that equivalence.

The most effective way of fixing this seems to be to create a new function
that looks up the GlobalTransactionData struct given the XID, and make
both TwoPhaseGetDummyBackendId and TwoPhaseGetDummyProc rely on that.

Per report from Robert Ross.

4741e9af.  This was done by adding an
optional second log file parameter to exec_prog(), and closing and
reopening the log file between system() calls.

Backpatch to 9.2.

Dave Kerr

Noted by Thom Brown.

Craig Ringer, edited fairly heavily by me

In particular, with a controlled shutdown of the master, pg_basebackup
with streaming log could terminate without an error message, even though
the backup is not consistent.

In passing, fix a few cases where walfile wasn't properly set to -1 after
closing.

Fujii Masao

We used to convert the unicode object directly to a string in the server
encoding by calling Python's PyUnicode_AsEncodedString function. In other
words, we used Python's routines to do the encoding. However, that has a
few problems. First of all, it required keeping a mapping table of Python
encoding names and PostgreSQL encodings. But the real killer was that Python
doesn't support EUC_TW and MULE_INTERNAL encodings at all.

Instead, convert the Python unicode object to UTF-8, and use PostgreSQL's
encoding conversion functions to convert from UTF-8 to server encoding. We
were already doing the same in the other direction in PLyUnicode_FromString,
so this is more consistent, too.

Note: This makes SQL_ASCII to behave more leniently. We used to map
SQL_ASCII to Python's 'ascii', which on Python means strict 7-bit ASCII
only, so you got an error if the python string contained anything but pure
ASCII. You no longer get an error; you get the UTF-8 representation of the
string instead.

Backpatch to 9.0, where these conversions were introduced.

Jan Urbański

Backpatch to 9.1 and 9.2.

DecodeInterval() failed to honor the "range" parameter (the special SQL
syntax for indicating which fields appear in the literal string) if the
time was signed.  This seems inappropriate, so make it work like the
not-signed case.  The inconsistency was introduced in my commit
f867339c, which as noted in its log message
was only really focused on making SQL-compliant literals work per spec.
Including a sign here is not per spec, but if we're going to allow it
then it's reasonable to expect it to work like the not-signed case.

Also, remove bogus setting of tmask, which caused subsequent processing to
think that what had been given was a timezone and not an hh:mm(:ss) field,
thus confusing checks for redundant fields.  This seems to be an aboriginal
mistake in Lockhart's commit 2cf16424.

Add regression test cases to illustrate the changed behaviors.

Back-patch as far as 8.4, where support for spec-compliant interval
literals was added.

Range problem reported and diagnosed by Amit Kapila, tmask problem by me.

Backpatch to 9.2

Erik Rijkers