autovacuum.c

/*-------------------------------------------------------------------------
 *
 * autovacuum.c
 *
 * PostgreSQL Integrated Autovacuum Daemon
 *
 * The autovacuum system is structured in two different kinds of processes: the
 * autovacuum launcher and the autovacuum worker.  The launcher is an
 * always-running process, started by the postmaster when the autovacuum GUC
 * parameter is set.  The launcher schedules autovacuum workers to be started
 * when appropriate.  The workers are the processes which execute the actual
 * vacuuming; they connect to a database as determined in the launcher, and
 * once connected they examine the catalogs to select the tables to vacuum.
 *
 * The autovacuum launcher cannot start the worker processes by itself,
 * because doing so would cause robustness issues (namely, failure to shut
 * them down on exceptional conditions, and also, since the launcher is
 * connected to shared memory and is thus subject to corruption there, it is
 * not as robust as the postmaster).  So it leaves that task to the postmaster.
 *
 * There is an autovacuum shared memory area, where the launcher stores
 * information about the database it wants vacuumed.  When it wants a new
 * worker to start, it sets a flag in shared memory and sends a signal to the
 * postmaster.	Then postmaster knows nothing more than it must start a worker;
 * so it forks a new child, which turns into a worker.	This new process
 * connects to shared memory, and there it can inspect the information that the
 * launcher has set up.
 *
 * If the fork() call fails in the postmaster, it sets a flag in the shared
 * memory area, and sends a signal to the launcher.  The launcher, upon
 * noticing the flag, can try starting the worker again by resending the
 * signal.	Note that the failure can only be transient (fork failure due to
 * high load, memory pressure, too many processes, etc); more permanent
 * problems, like failure to connect to a database, are detected later in the
 * worker and dealt with just by having the worker exit normally.  The launcher
 * will launch a new worker again later, per schedule.
 *
 * When the worker is done vacuuming it sends SIGUSR1 to the launcher.	The
 * launcher then wakes up and is able to launch another worker, if the schedule
 * is so tight that a new worker is needed immediately.  At this time the
 * launcher can also balance the settings for the various remaining workers'
 * cost-based vacuum delay feature.
 *
 * Note that there can be more than one worker in a database concurrently.
 * They will store the table they are currently vacuuming in shared memory, so
 * that other workers avoid being blocked waiting for the vacuum lock for that
 * table.  They will also reload the pgstats data just before vacuuming each
 * table, to avoid vacuuming a table that was just finished being vacuumed by
 * another worker and thus is no longer noted in shared memory.  However,
 * there is a window (caused by pgstat delay) on which a worker may choose a
 * table that was already vacuumed; this is a bug in the current design.
 *
 * Portions Copyright (c) 1996-2008, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  $PostgreSQL: pgsql/src/backend/postmaster/autovacuum.c,v 1.84 2008/08/13 00:07:50 alvherre Exp $
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <signal.h>
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
#include <unistd.h>

#include "access/genam.h"
#include "access/heapam.h"
#include "access/transam.h"
#include "access/xact.h"
#include "catalog/dependency.h"
#include "catalog/indexing.h"
#include "catalog/namespace.h"
#include "catalog/pg_autovacuum.h"
#include "catalog/pg_database.h"
#include "commands/dbcommands.h"
#include "commands/vacuum.h"
#include "libpq/hba.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "postmaster/autovacuum.h"
#include "postmaster/fork_process.h"
#include "postmaster/postmaster.h"
#include "storage/bufmgr.h"
#include "storage/fd.h"
#include "storage/ipc.h"
#include "storage/pmsignal.h"
#include "storage/proc.h"
#include "storage/procarray.h"
#include "storage/sinvaladt.h"
#include "tcop/tcopprot.h"
#include "utils/dynahash.h"
#include "utils/flatfiles.h"
#include "utils/fmgroids.h"
#include "utils/lsyscache.h"
#include "utils/memutils.h"
#include "utils/ps_status.h"
#include "utils/syscache.h"
#include "utils/tqual.h"


/*
 * GUC parameters
 */
bool		autovacuum_start_daemon = false;
int			autovacuum_max_workers;
int			autovacuum_naptime;
int			autovacuum_vac_thresh;
double		autovacuum_vac_scale;
int			autovacuum_anl_thresh;
double		autovacuum_anl_scale;
int			autovacuum_freeze_max_age;

int			autovacuum_vac_cost_delay;
int			autovacuum_vac_cost_limit;

int			Log_autovacuum_min_duration = -1;

/* how long to keep pgstat data in the launcher, in milliseconds */
#define STATS_READ_DELAY 1000


/* Flags to tell if we are in an autovacuum process */
static bool am_autovacuum_launcher = false;
static bool am_autovacuum_worker = false;

/* Flags set by signal handlers */
static volatile sig_atomic_t got_SIGHUP = false;
static volatile sig_atomic_t got_SIGUSR1 = false;
static volatile sig_atomic_t got_SIGTERM = false;

/* Comparison point for determining whether freeze_max_age is exceeded */
static TransactionId recentXid;

/* Default freeze_min_age to use for autovacuum (varies by database) */
static int	default_freeze_min_age;

/* Memory context for long-lived data */
static MemoryContext AutovacMemCxt;

/* struct to keep track of databases in launcher */
typedef struct avl_dbase
{
	Oid			adl_datid;		/* hash key -- must be first */
	TimestampTz adl_next_worker;
	int			adl_score;
} avl_dbase;

/* struct to keep track of databases in worker */
typedef struct avw_dbase
{
	Oid			adw_datid;
	char	   *adw_name;
	TransactionId adw_frozenxid;
	PgStat_StatDBEntry *adw_entry;
} avw_dbase;

/* struct to keep track of tables to vacuum and/or analyze, in 1st pass */
typedef struct av_relation
{
	Oid			ar_toastrelid;	/* hash key - must be first */
	Oid			ar_relid;
} av_relation;

/* struct to keep track of tables to vacuum and/or analyze, after rechecking */
typedef struct autovac_table
{
	Oid			at_relid;
	Oid			at_toastrelid;
	bool		at_dovacuum;
	bool		at_doanalyze;
	int			at_freeze_min_age;
	int			at_vacuum_cost_delay;
	int			at_vacuum_cost_limit;
	bool		at_wraparound;
	char	   *at_relname;
	char	   *at_nspname;
	char	   *at_datname;
} autovac_table;

/*-------------
 * This struct holds information about a single worker's whereabouts.  We keep
 * an array of these in shared memory, sized according to
 * autovacuum_max_workers.
 *
 * wi_links		entry into free list or running list
 * wi_dboid		OID of the database this worker is supposed to work on
 * wi_tableoid	OID of the table currently being vacuumed
 * wi_proc		pointer to PGPROC of the running worker, NULL if not started
 * wi_launchtime Time at which this worker was launched
 * wi_cost_*	Vacuum cost-based delay parameters current in this worker
 *
 * All fields are protected by AutovacuumLock, except for wi_tableoid which is
 * protected by AutovacuumScheduleLock (which is read-only for everyone except
 * that worker itself).
 *-------------
 */
typedef struct WorkerInfoData
{
	SHM_QUEUE	wi_links;
	Oid			wi_dboid;
	Oid			wi_tableoid;
	PGPROC	   *wi_proc;
	TimestampTz wi_launchtime;
	int			wi_cost_delay;
	int			wi_cost_limit;
	int			wi_cost_limit_base;
} WorkerInfoData;

typedef struct WorkerInfoData *WorkerInfo;

/*
 * Possible signals received by the launcher from remote processes.  These are
 * stored atomically in shared memory so that other processes can set them
 * without locking.
 */
typedef enum
{
	AutoVacForkFailed,			/* failed trying to start a worker */
	AutoVacRebalance,			/* rebalance the cost limits */
	AutoVacNumSignals = AutoVacRebalance		/* must be last */
} AutoVacuumSignal;

/*-------------
 * The main autovacuum shmem struct.  On shared memory we store this main
 * struct and the array of WorkerInfo structs.	This struct keeps:
 *
 * av_signal		set by other processes to indicate various conditions
 * av_launcherpid	the PID of the autovacuum launcher
 * av_freeWorkers	the WorkerInfo freelist
 * av_runningWorkers the WorkerInfo non-free queue
 * av_startingWorker pointer to WorkerInfo currently being started (cleared by
 *					the worker itself as soon as it's up and running)
 *
 * This struct is protected by AutovacuumLock, except for av_signal and parts
 * of the worker list (see above).
 *-------------
 */
typedef struct
{
	sig_atomic_t av_signal[AutoVacNumSignals];
	pid_t		av_launcherpid;
	SHMEM_OFFSET av_freeWorkers;
	SHM_QUEUE	av_runningWorkers;
	SHMEM_OFFSET av_startingWorker;
} AutoVacuumShmemStruct;

static AutoVacuumShmemStruct *AutoVacuumShmem;

/* the database list in the launcher, and the context that contains it */
static Dllist *DatabaseList = NULL;
static MemoryContext DatabaseListCxt = NULL;

/* Pointer to my own WorkerInfo, valid on each worker */
static WorkerInfo MyWorkerInfo = NULL;

/* PID of launcher, valid only in worker while shutting down */
int			AutovacuumLauncherPid = 0;

#ifdef EXEC_BACKEND
static pid_t avlauncher_forkexec(void);
static pid_t avworker_forkexec(void);
#endif
NON_EXEC_STATIC void AutoVacWorkerMain(int argc, char *argv[]);
NON_EXEC_STATIC void AutoVacLauncherMain(int argc, char *argv[]);

static Oid	do_start_worker(void);
static void launcher_determine_sleep(bool canlaunch, bool recursing,
						 struct timeval * nap);
static void launch_worker(TimestampTz now);
static List *get_database_list(void);
static void rebuild_database_list(Oid newdb);
static int	db_comparator(const void *a, const void *b);
static void autovac_balance_cost(void);

static void do_autovacuum(void);
static void FreeWorkerInfo(int code, Datum arg);

static autovac_table *table_recheck_autovac(Oid relid, HTAB *table_toast_map);
static void relation_needs_vacanalyze(Oid relid, Form_pg_autovacuum avForm,
						  Form_pg_class classForm,
						  PgStat_StatTabEntry *tabentry, bool *dovacuum,
						  bool *doanalyze, bool *wraparound);

static void autovacuum_do_vac_analyze(autovac_table *tab,
						  BufferAccessStrategy bstrategy);
static HeapTuple get_pg_autovacuum_tuple_relid(Relation avRel, Oid relid,
											   HTAB *table_toast_map);
static PgStat_StatTabEntry *get_pgstat_tabentry_relid(Oid relid, bool isshared,
						  PgStat_StatDBEntry *shared,
						  PgStat_StatDBEntry *dbentry);
static void autovac_report_activity(autovac_table *tab);
static void avl_sighup_handler(SIGNAL_ARGS);
static void avl_sigusr1_handler(SIGNAL_ARGS);
static void avl_sigterm_handler(SIGNAL_ARGS);
static void avl_quickdie(SIGNAL_ARGS);
static void autovac_refresh_stats(void);



/********************************************************************
 *					  AUTOVACUUM LAUNCHER CODE
 ********************************************************************/

#ifdef EXEC_BACKEND
/*
 * forkexec routine for the autovacuum launcher process.
 *
 * Format up the arglist, then fork and exec.
 */
static pid_t
avlauncher_forkexec(void)
{
	char	   *av[10];
	int			ac = 0;

	av[ac++] = "postgres";
	av[ac++] = "--forkavlauncher";
	av[ac++] = NULL;			/* filled in by postmaster_forkexec */
	av[ac] = NULL;

	Assert(ac < lengthof(av));

	return postmaster_forkexec(ac, av);
}

/*
 * We need this set from the outside, before InitProcess is called
 */
void
AutovacuumLauncherIAm(void)
{
	am_autovacuum_launcher = true;
}
#endif

/*
 * Main entry point for autovacuum launcher process, to be called from the
 * postmaster.
 */
int
StartAutoVacLauncher(void)
{
	pid_t		AutoVacPID;

#ifdef EXEC_BACKEND
	switch ((AutoVacPID = avlauncher_forkexec()))
#else
	switch ((AutoVacPID = fork_process()))
#endif
	{
		case -1:
			ereport(LOG,
					(errmsg("could not fork autovacuum launcher process: %m")));
			return 0;

#ifndef EXEC_BACKEND
		case 0:
			/* in postmaster child ... */
			/* Close the postmaster's sockets */
			ClosePostmasterPorts(false);

			/* Lose the postmaster's on-exit routines */
			on_exit_reset();

			AutoVacLauncherMain(0, NULL);
			break;
#endif
		default:
			return (int) AutoVacPID;
	}

	/* shouldn't get here */
	return 0;
}

/*
 * Main loop for the autovacuum launcher process.
 */
NON_EXEC_STATIC void
AutoVacLauncherMain(int argc, char *argv[])
{
	sigjmp_buf	local_sigjmp_buf;

	/* we are a postmaster subprocess now */
	IsUnderPostmaster = true;
	am_autovacuum_launcher = true;

	/* reset MyProcPid */
	MyProcPid = getpid();

	/* record Start Time for logging */
	MyStartTime = time(NULL);

	/* Identify myself via ps */
	init_ps_display("autovacuum launcher process", "", "", "");

	if (PostAuthDelay)
		pg_usleep(PostAuthDelay * 1000000L);

	SetProcessingMode(InitProcessing);

	/*
	 * If possible, make this process a group leader, so that the postmaster
	 * can signal any child processes too.	(autovacuum probably never has any
	 * child processes, but for consistency we make all postmaster child
	 * processes do this.)
	 */
#ifdef HAVE_SETSID
	if (setsid() < 0)
		elog(FATAL, "setsid() failed: %m");
#endif

	/*
	 * Set up signal handlers.	Since this is an auxiliary process, it has
	 * particular signal requirements -- no deadlock checker or sinval
	 * catchup, for example.
	 */
	pqsignal(SIGHUP, avl_sighup_handler);

	pqsignal(SIGINT, SIG_IGN);
	pqsignal(SIGTERM, avl_sigterm_handler);
	pqsignal(SIGQUIT, avl_quickdie);
	pqsignal(SIGALRM, SIG_IGN);

	pqsignal(SIGPIPE, SIG_IGN);
	pqsignal(SIGUSR1, avl_sigusr1_handler);
	/* We don't listen for async notifies */
	pqsignal(SIGUSR2, SIG_IGN);
	pqsignal(SIGFPE, FloatExceptionHandler);
	pqsignal(SIGCHLD, SIG_DFL);

	/* Early initialization */
	BaseInit();

	/*
	 * Create a per-backend PGPROC struct in shared memory, except in the
	 * EXEC_BACKEND case where this was done in SubPostmasterMain. We must do
	 * this before we can use LWLocks (and in the EXEC_BACKEND case we already
	 * had to do some stuff with LWLocks).
	 */
#ifndef EXEC_BACKEND
	InitAuxiliaryProcess();
#endif

	/*
	 * Create a memory context that we will do all our work in.  We do this so
	 * that we can reset the context during error recovery and thereby avoid
	 * possible memory leaks.
	 */
	AutovacMemCxt = AllocSetContextCreate(TopMemoryContext,
										  "Autovacuum Launcher",
										  ALLOCSET_DEFAULT_MINSIZE,
										  ALLOCSET_DEFAULT_INITSIZE,
										  ALLOCSET_DEFAULT_MAXSIZE);
	MemoryContextSwitchTo(AutovacMemCxt);


	/*
	 * If an exception is encountered, processing resumes here.
	 *
	 * This code is heavily based on bgwriter.c, q.v.
	 */
	if (sigsetjmp(local_sigjmp_buf, 1) != 0)
	{
		/* since not using PG_TRY, must reset error stack by hand */
		error_context_stack = NULL;

		/* Prevents interrupts while cleaning up */
		HOLD_INTERRUPTS();

		/* Report the error to the server log */
		EmitErrorReport();

		/*
		 * These operations are really just a minimal subset of
		 * AbortTransaction().	We don't have very many resources to worry
		 * about, but we do have LWLocks.
		 */
		LWLockReleaseAll();
		AtEOXact_Files();
		AtEOXact_HashTables(false);

		/*
		 * Now return to normal top-level context and clear ErrorContext for
		 * next time.
		 */
		MemoryContextSwitchTo(AutovacMemCxt);
		FlushErrorState();

		/* Flush any leaked data in the top-level context */
		MemoryContextResetAndDeleteChildren(AutovacMemCxt);

		/* don't leave dangling pointers to freed memory */
		DatabaseListCxt = NULL;
		DatabaseList = NULL;

		/*
		 * Make sure pgstat also considers our stat data as gone.  Note: we
		 * mustn't use autovac_refresh_stats here.
		 */
		pgstat_clear_snapshot();

		/* Now we can allow interrupts again */
		RESUME_INTERRUPTS();

		/*
		 * Sleep at least 1 second after any error.  We don't want to be
		 * filling the error logs as fast as we can.
		 */
		pg_usleep(1000000L);
	}

	/* We can now handle ereport(ERROR) */
	PG_exception_stack = &local_sigjmp_buf;

	ereport(LOG,
			(errmsg("autovacuum launcher started")));

	/* must unblock signals before calling rebuild_database_list */
	PG_SETMASK(&UnBlockSig);

	/* in emergency mode, just start a worker and go away */
	if (!AutoVacuumingActive())
	{
		do_start_worker();
		proc_exit(0);			/* done */
	}

	AutoVacuumShmem->av_launcherpid = MyProcPid;

	/*
	 * Create the initial database list.  The invariant we want this list to
	 * keep is that it's ordered by decreasing next_time.  As soon as an entry
	 * is updated to a higher time, it will be moved to the front (which is
	 * correct because the only operation is to add autovacuum_naptime to the
	 * entry, and time always increases).
	 */
	rebuild_database_list(InvalidOid);

	for (;;)
	{
		struct timeval nap;
		TimestampTz current_time = 0;
		bool		can_launch;
		Dlelem	   *elem;

		/*
		 * Emergency bailout if postmaster has died.  This is to avoid the
		 * necessity for manual cleanup of all postmaster children.
		 */
		if (!PostmasterIsAlive(true))
			exit(1);

		launcher_determine_sleep(AutoVacuumShmem->av_freeWorkers !=
								 INVALID_OFFSET, false, &nap);

		/*
		 * Sleep for a while according to schedule.
		 *
		 * On some platforms, signals won't interrupt the sleep.  To ensure we
		 * respond reasonably promptly when someone signals us, break down the
		 * sleep into 1-second increments, and check for interrupts after each
		 * nap.
		 */
		while (nap.tv_sec > 0 || nap.tv_usec > 0)
		{
			uint32		sleeptime;

			if (nap.tv_sec > 0)
			{
				sleeptime = 1000000;
				nap.tv_sec--;
			}
			else
			{
				sleeptime = nap.tv_usec;
				nap.tv_usec = 0;
			}
			pg_usleep(sleeptime);

			/*
			 * Emergency bailout if postmaster has died.  This is to avoid the
			 * necessity for manual cleanup of all postmaster children.
			 */
			if (!PostmasterIsAlive(true))
				exit(1);

			if (got_SIGTERM || got_SIGHUP || got_SIGUSR1)
				break;
		}

		/* the normal shutdown case */
		if (got_SIGTERM)
			break;

		if (got_SIGHUP)
		{
			got_SIGHUP = false;
			ProcessConfigFile(PGC_SIGHUP);

			/* shutdown requested in config file */
			if (!AutoVacuumingActive())
				break;

			/* rebalance in case the default cost parameters changed */
			LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
			autovac_balance_cost();
			LWLockRelease(AutovacuumLock);

			/* rebuild the list in case the naptime changed */
			rebuild_database_list(InvalidOid);
		}

		/*
		 * a worker finished, or postmaster signalled failure to start a
		 * worker
		 */
		if (got_SIGUSR1)
		{
			got_SIGUSR1 = false;

			/* rebalance cost limits, if needed */
			if (AutoVacuumShmem->av_signal[AutoVacRebalance])
			{
				LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
				AutoVacuumShmem->av_signal[AutoVacRebalance] = false;
				autovac_balance_cost();
				LWLockRelease(AutovacuumLock);
			}

			if (AutoVacuumShmem->av_signal[AutoVacForkFailed])
			{
				/*
				 * If the postmaster failed to start a new worker, we sleep
				 * for a little while and resend the signal.  The new worker's
				 * state is still in memory, so this is sufficient.  After
				 * that, we restart the main loop.
				 *
				 * XXX should we put a limit to the number of times we retry?
				 * I don't think it makes much sense, because a future start
				 * of a worker will continue to fail in the same way.
				 */
				AutoVacuumShmem->av_signal[AutoVacForkFailed] = false;
				pg_usleep(100000L);		/* 100ms */
				SendPostmasterSignal(PMSIGNAL_START_AUTOVAC_WORKER);
				continue;
			}
		}

		/*
		 * There are some conditions that we need to check before trying to
		 * start a launcher.  First, we need to make sure that there is a
		 * launcher slot available.  Second, we need to make sure that no
		 * other worker failed while starting up.
		 */

		current_time = GetCurrentTimestamp();
		LWLockAcquire(AutovacuumLock, LW_SHARED);

		can_launch = (AutoVacuumShmem->av_freeWorkers != INVALID_OFFSET);

		if (AutoVacuumShmem->av_startingWorker != INVALID_OFFSET)
		{
			int			waittime;

			WorkerInfo	worker = (WorkerInfo) MAKE_PTR(AutoVacuumShmem->av_startingWorker);

			/*
			 * We can't launch another worker when another one is still
			 * starting up (or failed while doing so), so just sleep for a bit
			 * more; that worker will wake us up again as soon as it's ready.
			 * We will only wait autovacuum_naptime seconds (up to a maximum
			 * of 60 seconds) for this to happen however.  Note that failure
			 * to connect to a particular database is not a problem here,
			 * because the worker removes itself from the startingWorker
			 * pointer before trying to connect.  Problems detected by the
			 * postmaster (like fork() failure) are also reported and handled
			 * differently.  The only problems that may cause this code to
			 * fire are errors in the earlier sections of AutoVacWorkerMain,
			 * before the worker removes the WorkerInfo from the
			 * startingWorker pointer.
			 */
			waittime = Min(autovacuum_naptime, 60) * 1000;
			if (TimestampDifferenceExceeds(worker->wi_launchtime, current_time,
										   waittime))
			{
				LWLockRelease(AutovacuumLock);
				LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);

				/*
				 * No other process can put a worker in starting mode, so if
				 * startingWorker is still INVALID after exchanging our lock,
				 * we assume it's the same one we saw above (so we don't
				 * recheck the launch time).
				 */
				if (AutoVacuumShmem->av_startingWorker != INVALID_OFFSET)
				{
					worker = (WorkerInfo) MAKE_PTR(AutoVacuumShmem->av_startingWorker);
					worker->wi_dboid = InvalidOid;
					worker->wi_tableoid = InvalidOid;
					worker->wi_proc = NULL;
					worker->wi_launchtime = 0;
					worker->wi_links.next = AutoVacuumShmem->av_freeWorkers;
					AutoVacuumShmem->av_freeWorkers = MAKE_OFFSET(worker);
					AutoVacuumShmem->av_startingWorker = INVALID_OFFSET;
					elog(WARNING, "worker took too long to start; cancelled");
				}
			}
			else
				can_launch = false;
		}
		LWLockRelease(AutovacuumLock);	/* either shared or exclusive */

		/* if we can't do anything, just go back to sleep */
		if (!can_launch)
			continue;

		/* We're OK to start a new worker */

		elem = DLGetTail(DatabaseList);
		if (elem != NULL)
		{
			avl_dbase  *avdb = DLE_VAL(elem);

			/*
			 * launch a worker if next_worker is right now or it is in the
			 * past
			 */
			if (TimestampDifferenceExceeds(avdb->adl_next_worker,
										   current_time, 0))
				launch_worker(current_time);
		}
		else
		{
			/*
			 * Special case when the list is empty: start a worker right away.
			 * This covers the initial case, when no database is in pgstats
			 * (thus the list is empty).  Note that the constraints in
			 * launcher_determine_sleep keep us from starting workers too
			 * quickly (at most once every autovacuum_naptime when the list is
			 * empty).
			 */
			launch_worker(current_time);
		}
	}

	/* Normal exit from the autovac launcher is here */
	ereport(LOG,
			(errmsg("autovacuum launcher shutting down")));
	AutoVacuumShmem->av_launcherpid = 0;

	proc_exit(0);				/* done */
}

/*
 * Determine the time to sleep, based on the database list.
 *
 * The "canlaunch" parameter indicates whether we can start a worker right now,
 * for example due to the workers being all busy.  If this is false, we will
 * cause a long sleep, which will be interrupted when a worker exits.
 */
static void
launcher_determine_sleep(bool canlaunch, bool recursing, struct timeval * nap)
{
	Dlelem	   *elem;

	/*
	 * We sleep until the next scheduled vacuum.  We trust that when the
	 * database list was built, care was taken so that no entries have times
	 * in the past; if the first entry has too close a next_worker value, or a
	 * time in the past, we will sleep a small nominal time.
	 */
	if (!canlaunch)
	{
		nap->tv_sec = autovacuum_naptime;
		nap->tv_usec = 0;
	}
	else if ((elem = DLGetTail(DatabaseList)) != NULL)
	{
		avl_dbase  *avdb = DLE_VAL(elem);
		TimestampTz current_time = GetCurrentTimestamp();
		TimestampTz next_wakeup;
		long		secs;
		int			usecs;

		next_wakeup = avdb->adl_next_worker;
		TimestampDifference(current_time, next_wakeup, &secs, &usecs);

		nap->tv_sec = secs;
		nap->tv_usec = usecs;
	}
	else
	{
		/* list is empty, sleep for whole autovacuum_naptime seconds  */
		nap->tv_sec = autovacuum_naptime;
		nap->tv_usec = 0;
	}

	/*
	 * If the result is exactly zero, it means a database had an entry with
	 * time in the past.  Rebuild the list so that the databases are evenly
	 * distributed again, and recalculate the time to sleep.  This can happen
	 * if there are more tables needing vacuum than workers, and they all take
	 * longer to vacuum than autovacuum_naptime.
	 *
	 * We only recurse once.  rebuild_database_list should always return times
	 * in the future, but it seems best not to trust too much on that.
	 */
	if (nap->tv_sec == 0 && nap->tv_usec == 0 && !recursing)
	{
		rebuild_database_list(InvalidOid);
		launcher_determine_sleep(canlaunch, true, nap);
		return;
	}

	/* 100ms is the smallest time we'll allow the launcher to sleep */
	if (nap->tv_sec <= 0 && nap->tv_usec <= 100000)
	{
		nap->tv_sec = 0;
		nap->tv_usec = 100000;	/* 100 ms */
	}
}

/*
 * Build an updated DatabaseList.  It must only contain databases that appear
 * in pgstats, and must be sorted by next_worker from highest to lowest,
 * distributed regularly across the next autovacuum_naptime interval.
 *
 * Receives the Oid of the database that made this list be generated (we call
 * this the "new" database, because when the database was already present on
 * the list, we expect that this function is not called at all).  The
 * preexisting list, if any, will be used to preserve the order of the
 * databases in the autovacuum_naptime period.	The new database is put at the
 * end of the interval.  The actual values are not saved, which should not be
 * much of a problem.
 */
static void
rebuild_database_list(Oid newdb)
{
	List	   *dblist;
	ListCell   *cell;
	MemoryContext newcxt;
	MemoryContext oldcxt;
	MemoryContext tmpcxt;
	HASHCTL		hctl;
	int			score;
	int			nelems;
	HTAB	   *dbhash;

	/* use fresh stats */
	autovac_refresh_stats();

	newcxt = AllocSetContextCreate(AutovacMemCxt,
								   "AV dblist",
								   ALLOCSET_DEFAULT_MINSIZE,
								   ALLOCSET_DEFAULT_INITSIZE,
								   ALLOCSET_DEFAULT_MAXSIZE);
	tmpcxt = AllocSetContextCreate(newcxt,
								   "tmp AV dblist",
								   ALLOCSET_DEFAULT_MINSIZE,
								   ALLOCSET_DEFAULT_INITSIZE,
								   ALLOCSET_DEFAULT_MAXSIZE);
	oldcxt = MemoryContextSwitchTo(tmpcxt);

	/*
	 * Implementing this is not as simple as it sounds, because we need to put
	 * the new database at the end of the list; next the databases that were
	 * already on the list, and finally (at the tail of the list) all the
	 * other databases that are not on the existing list.
	 *
	 * To do this, we build an empty hash table of scored databases.  We will
	 * start with the lowest score (zero) for the new database, then
	 * increasing scores for the databases in the existing list, in order, and
	 * lastly increasing scores for all databases gotten via
	 * get_database_list() that are not already on the hash.
	 *
	 * Then we will put all the hash elements into an array, sort the array by
	 * score, and finally put the array elements into the new doubly linked
	 * list.
	 */
	hctl.keysize = sizeof(Oid);
	hctl.entrysize = sizeof(avl_dbase);
	hctl.hash = oid_hash;
	hctl.hcxt = tmpcxt;
	dbhash = hash_create("db hash", 20, &hctl,	/* magic number here FIXME */
						 HASH_ELEM | HASH_FUNCTION | HASH_CONTEXT);

	/* start by inserting the new database */
	score = 0;
	if (OidIsValid(newdb))
	{
		avl_dbase  *db;
		PgStat_StatDBEntry *entry;

		/* only consider this database if it has a pgstat entry */
		entry = pgstat_fetch_stat_dbentry(newdb);
		if (entry != NULL)
		{
			/* we assume it isn't found because the hash was just created */
			db = hash_search(dbhash, &newdb, HASH_ENTER, NULL);

			/* hash_search already filled in the key */
			db->adl_score = score++;
			/* next_worker is filled in later */
		}
	}

	/* Now insert the databases from the existing list */
	if (DatabaseList != NULL)
	{
		Dlelem	   *elem;

		elem = DLGetHead(DatabaseList);
		while (elem != NULL)
		{
			avl_dbase  *avdb = DLE_VAL(elem);
			avl_dbase  *db;
			bool		found;
			PgStat_StatDBEntry *entry;

			elem = DLGetSucc(elem);

			/*
			 * skip databases with no stat entries -- in particular, this gets
			 * rid of dropped databases
			 */
			entry = pgstat_fetch_stat_dbentry(avdb->adl_datid);
			if (entry == NULL)
				continue;

			db = hash_search(dbhash, &(avdb->adl_datid), HASH_ENTER, &found);

			if (!found)
			{
				/* hash_search already filled in the key */
				db->adl_score = score++;
				/* next_worker is filled in later */
			}
		}
	}

	/* finally, insert all qualifying databases not previously inserted */
	dblist = get_database_list();
	foreach(cell, dblist)
	{
		avw_dbase  *avdb = lfirst(cell);
		avl_dbase  *db;
		bool		found;
		PgStat_StatDBEntry *entry;

		/* only consider databases with a pgstat entry */
		entry = pgstat_fetch_stat_dbentry(avdb->adw_datid);
		if (entry == NULL)
			continue;

		db = hash_search(dbhash, &(avdb->adw_datid), HASH_ENTER, &found);
		/* only update the score if the database was not already on the hash */
		if (!found)
		{
			/* hash_search already filled in the key */
			db->adl_score = score++;
			/* next_worker is filled in later */
		}
	}
	nelems = score;

	/* from here on, the allocated memory belongs to the new list */
	MemoryContextSwitchTo(newcxt);
	DatabaseList = DLNewList();

	if (nelems > 0)
	{
		TimestampTz current_time;
		int			millis_increment;
		avl_dbase  *dbary;
		avl_dbase  *db;
		HASH_SEQ_STATUS seq;
		int			i;

		/* put all the hash elements into an array */
		dbary = palloc(nelems * sizeof(avl_dbase));

		i = 0;
		hash_seq_init(&seq, dbhash);
		while ((db = hash_seq_search(&seq)) != NULL)
			memcpy(&(dbary[i++]), db, sizeof(avl_dbase));

		/* sort the array */
		qsort(dbary, nelems, sizeof(avl_dbase), db_comparator);

		/* this is the time interval between databases in the schedule */
		millis_increment = 1000.0 * autovacuum_naptime / nelems;
		current_time = GetCurrentTimestamp();

		/*