This function is like the PQserverVersion() function except
it returns the version of libpq, making it possible for a client
program or driver to determine which version of libpq is in
use at runtime, and not just at link time.

Suggested by Harald Armin Massa and several others.

Jaime Casanova

Add support for collecting "minidump" style crash dumps on
Windows, by setting up an exception handling filter. Crash
dumps will be generated in PGDATA/crashdumps if the directory
is created (the existance of the directory is used as on/off
switch for the generation of the dumps).

Craig Ringer and Magnus Hagander

Per report from Fujii Masao, and subsequent discussion.

One of the usages of the binary version is to read files in a different
encoding from the server encoding.

Dimitri Fontaine and Itagaki Takahiro.

documentation.  (Many were left over from the old pg_migrator naming.)

Noted by Tom Lane.

Fujii Masao.  Review by Alvaro Herrera, Tom Lane, and myself.

Fujii Masao

Recent versions of the Linux system header files cause xlogdefs.h to
believe that open_datasync should be the default sync method, whereas
formerly fdatasync was the default on Linux.  open_datasync is a bad
choice, first because it doesn't actually outperform fdatasync (in fact
the reverse), and second because we try to use O_DIRECT with it, causing
failures on certain filesystems (e.g., ext4 with data=journal option).
This part of the patch is largely per a proposal from Marti Raudsepp.
More extensive changes are likely to follow in HEAD, but this is as much
change as we want to back-patch.

Also clean up confusing code and incorrect documentation surrounding the
fsync_writethrough option.  Those changes shouldn't result in any actual
behavioral change, but I chose to back-patch them anyway to keep the
branches looking similar in this area.

In 9.0 and HEAD, also do some copy-editing on the WAL Reliability
documentation section.

Back-patch to all supported branches, since any of them might get used
on modern Linux versions.

First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.

Greg Smith

Teodor Sigaev, with some revision by Tom

This is a heavily revised version of builtin_knngist_core-0.9.  The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.

Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too.  Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values.  AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.

Teodor Sigaev and Tom Lane

Christoph Berg.

Per gripe from Andreas Scherbaum.

KaiGai Kohei, with a few changes by me.

Basically, we want to distinguish all cases where the connection was
not made from those where it was.  A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure.  (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)

If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else.  Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request.  We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.

In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.

This adds support for changing the schema of a conversion, operator,
operator class, operator family, text search configuration, text search
dictionary, text search parser, or text search template.

Dimitri Fontaine, with assorted corrections and other kibitzing.

status, including a status where the server is running but refuses a
postgres connection.

Have pg_ctl use this new function.  This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.

reduce recovery time.

supplied, also print the IP address.  This allows IPv4 and IPv6 failures
to be distinguished.  Also useful when a hostname resolves to multiple
IP addresses.

Also, remove use of inet_ntoa() and use our own inet_net_ntop() in all
places, including in libpq, because it is thread-safe.

This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am.  For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.

Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.

I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.

Teodor Sigaev, Robert Haas, Tom Lane

Also, move index entries into the tables, closer to the function description,
for easier editing in the future.  Resort some tables to be more alphabetical.
Remove the entries for count, max, min, and sum in the tutorial area, because
that was felt to be confusing.

Thom Brown

This adds RESTRICT/CASCADE flags to ALTER TYPE ... ADD/DROP/ALTER/
RENAME ATTRIBUTE to control whether to alter typed tables as well.

Currently, three conversion format specifiers are supported: %s for a
string, %L for an SQL literal, and %I for an SQL identifier.  The latter
two are deliberately designed not to overlap with what sprintf() already
supports, in case we want to add more of sprintf()'s functionality here
later.

Patch by Pavel Stehule, heavily revised by me.  Reviewed by Jeff Janes
and, in earlier versions, by Itagaki Takahiro and Tom Lane.

This function is useful to obtain textual descriptions of objects as
stored in pg_depend.

Problems noted by Thom Brown.

KaiGai Kohei, with editing and markup fixes by me.

In the previous coding, we simply issued ALTER SEQUENCE RESTART commands,
which do not roll back on error.  This meant that an error between
truncating and committing left the sequences out of sync with the table
contents, with potentially bad consequences as were noted in a Warning on
the TRUNCATE man page.

To fix, create a new storage file (relfilenode) for a sequence that is to
be reset due to RESTART IDENTITY.  If the transaction aborts, we'll
automatically revert to the old storage file.  This acts just like a
rewriting ALTER TABLE operation.  A penalty is that we have to take
exclusive lock on the sequence, but since we've already got exclusive lock
on its owning table, that seems unlikely to be much of a problem.

The interaction of this with usual nontransactional behaviors of sequence
operations is a bit weird, but it's hard to see what would be completely
consistent.  Our choice is to discard cached-but-unissued sequence values
both when the RESTART is executed, and at rollback if any; but to not touch
the currval() state either time.

In passing, move the sequence reset operations to happen before not after
any AFTER TRUNCATE triggers are fired.  The previous ordering was not
logically sensible, but was forced by the need to minimize inconsistency
if the triggers caused an error.  Transactional rollback is a much better
solution to that.

Patch by Steve Singer, rather heavily adjusted by me.

This new field counts the number of times that a backend which writes a
buffer out to the OS must also fsync() it.  This happens when the
bgwriter fsync request queue is full, and is generally detrimental to
performance, so it's good to know when it's happening.  Along the way,
log a new message at level DEBUG1 whenever we fail to hand off an fsync,
so that the problem can also be seen in examination of log files
(if the logging level is cranked up high enough).

Greg Smith, with minor tweaks by me.