<!-- $PostgreSQL: pgsql/doc/src/sgml/syntax.sgml,v 1.137 2009/10/08 02:39:16 tgl Exp $ -->

<chapter id="sql-syntax">
 <title>SQL Syntax</title>

 <indexterm zone="sql-syntax">
  <primary>syntax</primary>
  <secondary>SQL</secondary>
 </indexterm>

 <para>
  This chapter describes the syntax of SQL.  It forms the foundation
  for understanding the following chapters which will go into detail
  about how SQL commands are applied to define and modify data.
 </para>

 <para>
  We also advise users who are already familiar with SQL to read this
  chapter carefully because it contains several rules and concepts that
  are implemented inconsistently among SQL databases or that are
  specific to <productname>PostgreSQL</productname>.
 </para>

 <sect1 id="sql-syntax-lexical">
  <title>Lexical Structure</title>

  <indexterm>
   <primary>token</primary>
  </indexterm>

  <para>
   SQL input consists of a sequence of
   <firstterm>commands</firstterm>.  A command is composed of a
   sequence of <firstterm>tokens</firstterm>, terminated by a
   semicolon (<quote>;</quote>).  The end of the input stream also
   terminates a command.  Which tokens are valid depends on the syntax
   of the particular command.
  </para>

  <para>
   A token can be a <firstterm>key word</firstterm>, an
   <firstterm>identifier</firstterm>, a <firstterm>quoted
   identifier</firstterm>, a <firstterm>literal</firstterm> (or
   constant), or a special character symbol.  Tokens are normally
   separated by whitespace (space, tab, newline), but need not be if
   there is no ambiguity (which is generally only the case if a
   special character is adjacent to some other token type).
  </para>

  <para>
   Additionally, <firstterm>comments</firstterm> can occur in SQL
   input.  They are not tokens, they are effectively equivalent to
   whitespace.
  </para>

   <para>
    For example, the following is (syntactically) valid SQL input:
<programlisting>
SELECT * FROM MY_TABLE;
UPDATE MY_TABLE SET A = 5;
INSERT INTO MY_TABLE VALUES (3, 'hi there');
</programlisting>
    This is a sequence of three commands, one per line (although this
    is not required; more than one command can be on a line, and
    commands can usefully be split across lines).
   </para>

  <para>
   The SQL syntax is not very consistent regarding what tokens
   identify commands and which are operands or parameters.  The first
   few tokens are generally the command name, so in the above example
   we would usually speak of a <quote>SELECT</quote>, an
   <quote>UPDATE</quote>, and an <quote>INSERT</quote> command.  But
   for instance the <command>UPDATE</command> command always requires
   a <token>SET</token> token to appear in a certain position, and
   this particular variation of <command>INSERT</command> also
   requires a <token>VALUES</token> in order to be complete.  The
   precise syntax rules for each command are described in <xref linkend="reference">.
  </para>

  <sect2 id="sql-syntax-identifiers">
   <title>Identifiers and Key Words</title>

   <indexterm zone="sql-syntax-identifiers">
    <primary>identifier</primary>
    <secondary>syntax of</secondary>
   </indexterm>

   <indexterm zone="sql-syntax-identifiers">
    <primary>name</primary>
    <secondary>syntax of</secondary>
   </indexterm>

   <indexterm zone="sql-syntax-identifiers">
    <primary>key word</primary>
    <secondary>syntax of</secondary>
   </indexterm>

   <para>
    Tokens such as <token>SELECT</token>, <token>UPDATE</token>, or
    <token>VALUES</token> in the example above are examples of
    <firstterm>key words</firstterm>, that is, words that have a fixed
    meaning in the SQL language.  The tokens <token>MY_TABLE</token>
    and <token>A</token> are examples of
    <firstterm>identifiers</firstterm>.  They identify names of
    tables, columns, or other database objects, depending on the
    command they are used in.  Therefore they are sometimes simply
    called <quote>names</quote>.  Key words and identifiers have the
    same lexical structure, meaning that one cannot know whether a
    token is an identifier or a key word without knowing the language.
    A complete list of key words can be found in <xref
    linkend="sql-keywords-appendix">.
   </para>

   <para>
    SQL identifiers and key words must begin with a letter
    (<literal>a</literal>-<literal>z</literal>, but also letters with
    diacritical marks and non-Latin letters) or an underscore
    (<literal>_</literal>).  Subsequent characters in an identifier or
    key word can be letters, underscores, digits
    (<literal>0</literal>-<literal>9</literal>), or dollar signs
    (<literal>$</>).  Note that dollar signs are not allowed in identifiers
    according to the letter of the SQL standard, so their use might render
    applications less portable.
    The SQL standard will not define a key word that contains
    digits or starts or ends with an underscore, so identifiers of this
    form are safe against possible conflict with future extensions of the
    standard.
   </para>

   <para>
    <indexterm><primary>identifier</primary><secondary>length</secondary></indexterm>
    The system uses no more than <symbol>NAMEDATALEN</symbol>-1
    bytes of an identifier; longer names can be written in
    commands, but they will be truncated.  By default,
    <symbol>NAMEDATALEN</symbol> is 64 so the maximum identifier
    length is 63 bytes. If this limit is problematic, it can be raised by
    changing the <symbol>NAMEDATALEN</symbol> constant in
    <filename>src/include/pg_config_manual.h</filename>.
   </para>

   <para>
    <indexterm>
     <primary>case sensitivity</primary>
     <secondary>of SQL commands</secondary>
    </indexterm>
    Identifier and key word names are case insensitive.  Therefore:
<programlisting>
UPDATE MY_TABLE SET A = 5;
</programlisting>
    can equivalently be written as:
<programlisting>
uPDaTE my_TabLE SeT a = 5;
</programlisting>
    A convention often used is to write key words in upper
    case and names in lower case, e.g.:
<programlisting>
UPDATE my_table SET a = 5;
</programlisting>
   </para>

   <para>
    <indexterm>
     <primary>quotation marks</primary>
     <secondary>and identifiers</secondary>
    </indexterm>
    There is a second kind of identifier:  the <firstterm>delimited
    identifier</firstterm> or <firstterm>quoted
    identifier</firstterm>.  It is formed by enclosing an arbitrary
    sequence of characters in double-quotes
    (<literal>"</literal>). <!-- " font-lock mania --> A delimited
    identifier is always an identifier, never a key word.  So
    <literal>"select"</literal> could be used to refer to a column or
    table named <quote>select</quote>, whereas an unquoted
    <literal>select</literal> would be taken as a key word and
    would therefore provoke a parse error when used where a table or
    column name is expected.  The example can be written with quoted
    identifiers like this:
<programlisting>
UPDATE "my_table" SET "a" = 5;
</programlisting>
   </para>

   <para>
    Quoted identifiers can contain any character, except the character
    with code zero.  (To include a double quote, write two double quotes.)
    This allows constructing table or column names that would
    otherwise not be possible, such as ones containing spaces or
    ampersands.  The length limitation still applies.
   </para>

   <para>
    <indexterm><primary>Unicode escape</primary><secondary>in
    identifiers</secondary></indexterm> A variant of quoted
    identifiers allows including escaped Unicode characters identified
    by their code points.  This variant starts
    with <literal>U&amp;</literal> (upper or lower case U followed by
    ampersand) immediately before the opening double quote, without
    any spaces in between, for example <literal>U&amp;"foo"</literal>.
    (Note that this creates an ambiguity with the
    operator <literal>&amp;</literal>.  Use spaces around the operator to
    avoid this problem.)  Inside the quotes, Unicode characters can be
    specified in escaped form by writing a backslash followed by the
    four-digit hexadecimal code point number or alternatively a
    backslash followed by a plus sign followed by a six-digit
    hexadecimal code point number.  For example, the
    identifier <literal>"data"</literal> could be written as
<programlisting>
U&amp;"d\0061t\+000061"
</programlisting>
    The following less trivial example writes the Russian
    word <quote>slon</quote> (elephant) in Cyrillic letters:
<programlisting>
U&amp;"\0441\043B\043E\043D"
</programlisting>
   </para>

   <para>
    If a different escape character than backslash is desired, it can
    be specified using
    the <literal>UESCAPE</literal><indexterm><primary>UESCAPE</primary></indexterm>
    clause after the string, for example:
<programlisting>
U&amp;"d!0061t!+000061" UESCAPE '!'
</programlisting>
    The escape character can be any single character other than a
    hexadecimal digit, the plus sign, a single quote, a double quote,
    or a whitespace character.  Note that the escape character is
    written in single quotes, not double quotes.
   </para>

   <para>
    To include the escape character in the identifier literally, write
    it twice.
   </para>

   <para>
    The Unicode escape syntax works only when the server encoding is
    UTF8.  When other server encodings are used, only code points in
    the ASCII range (up to <literal>\007F</literal>) can be specified.
    Both the 4-digit and the 6-digit form can be used to specify
    UTF-16 surrogate pairs to compose characters with code points
    larger than <literal>\FFFF</literal> (although the availability of
    the 6-digit form technically makes this unnecessary).
   </para>

   <para>
    Quoting an identifier also makes it case-sensitive, whereas
    unquoted names are always folded to lower case.  For example, the
    identifiers <literal>FOO</literal>, <literal>foo</literal>, and
    <literal>"foo"</literal> are considered the same by
    <productname>PostgreSQL</productname>, but
    <literal>"Foo"</literal> and <literal>"FOO"</literal> are
    different from these three and each other.  (The folding of
    unquoted names to lower case in <productname>PostgreSQL</> is
    incompatible with the SQL standard, which says that unquoted names
    should be folded to upper case.  Thus, <literal>foo</literal>
    should be equivalent to <literal>"FOO"</literal> not
    <literal>"foo"</literal> according to the standard.  If you want
    to write portable applications you are advised to always quote a
    particular name or never quote it.)
   </para>
  </sect2>


  <sect2 id="sql-syntax-constants">
   <title>Constants</title>

   <indexterm zone="sql-syntax-constants">
    <primary>constant</primary>
   </indexterm>

   <para>
    There are three kinds of <firstterm>implicitly-typed
    constants</firstterm> in <productname>PostgreSQL</productname>:
    strings, bit strings, and numbers.
    Constants can also be specified with explicit types, which can
    enable more accurate representation and more efficient handling by
    the system. These alternatives are discussed in the following
    subsections.
   </para>

   <sect3 id="sql-syntax-strings">
    <title>String Constants</title>

    <indexterm zone="sql-syntax-strings">
     <primary>character string</primary>
     <secondary>constant</secondary>
    </indexterm>

    <para>
     <indexterm>
      <primary>quotation marks</primary>
      <secondary>escaping</secondary>
     </indexterm>
     A string constant in SQL is an arbitrary sequence of characters
     bounded by single quotes (<literal>'</literal>), for example
     <literal>'This is a string'</literal>.  To include
     a single-quote character within a string constant,
     write two adjacent single quotes, e.g.,
     <literal>'Dianne''s horse'</literal>.
     Note that this is <emphasis>not</> the same as a double-quote
     character (<literal>"</>). <!-- font-lock sanity: " -->
    </para>

    <para>
     Two string constants that are only separated by whitespace
     <emphasis>with at least one newline</emphasis> are concatenated
     and effectively treated as if the string had been written as one
     constant.  For example:
<programlisting>
SELECT 'foo'
'bar';
</programlisting>
     is equivalent to:
<programlisting>
SELECT 'foobar';
</programlisting>
     but:
<programlisting>
SELECT 'foo'      'bar';
</programlisting>
     is not valid syntax.  (This slightly bizarre behavior is specified
     by <acronym>SQL</acronym>; <productname>PostgreSQL</productname> is
     following the standard.)
    </para>
   </sect3>

   <sect3 id="sql-syntax-strings-escape">
    <title>String Constants with C-Style Escapes</title>

     <indexterm zone="sql-syntax-strings-escape">
      <primary>escape string syntax</primary>
     </indexterm>
     <indexterm zone="sql-syntax-strings-escape">
      <primary>backslash escapes</primary>
     </indexterm>

    <para>
     <productname>PostgreSQL</productname> also accepts <quote>escape</>
     string constants, which are an extension to the SQL standard.
     An escape string constant is specified by writing the letter
     <literal>E</literal> (upper or lower case) just before the opening single
     quote, e.g., <literal>E'foo'</>.  (When continuing an escape string
     constant across lines, write <literal>E</> only before the first opening
     quote.)
     Within an escape string, a backslash character (<literal>\</>) begins a
     C-like <firstterm>backslash escape</> sequence, in which the combination
     of backslash and following character(s) represent a special byte
     value, as shown in <xref linkend="sql-backslash-table">.
    </para>

     <table id="sql-backslash-table">
      <title>Backslash Escape Sequences</title>
      <tgroup cols="2">
      <thead>
       <row>
        <entry>Backslash Escape Sequence</>
        <entry>Interpretation</entry>
       </row>
      </thead>

      <tbody>
       <row>
        <entry><literal>\b</literal></entry>
        <entry>backspace</entry>
       </row>
       <row>
        <entry><literal>\f</literal></entry>
        <entry>form feed</entry>
       </row>
       <row>
        <entry><literal>\n</literal></entry>
        <entry>newline</entry>
       </row>
       <row>
        <entry><literal>\r</literal></entry>
        <entry>carriage return</entry>
       </row>
       <row>
        <entry><literal>\t</literal></entry>
        <entry>tab</entry>
       </row>
       <row>
        <entry>
         <literal>\<replaceable>o</replaceable></literal>,
         <literal>\<replaceable>oo</replaceable></literal>,
         <literal>\<replaceable>ooo</replaceable></literal>
         (<replaceable>o</replaceable> = 0 - 7)
        </entry>
        <entry>octal byte value</entry>
       </row>
       <row>
        <entry>
         <literal>\x<replaceable>h</replaceable></literal>,
         <literal>\x<replaceable>hh</replaceable></literal>
         (<replaceable>h</replaceable> = 0 - 9, A - F)
        </entry>
        <entry>hexadecimal byte value</entry>
       </row>
       <row>
        <entry>
         <literal>\u<replaceable>xxxx</replaceable></literal>,
         <literal>\U<replaceable>xxxxxxxx</replaceable></literal>
         (<replaceable>x</replaceable> = 0 - 9, A - F)
        </entry>
        <entry>16 or 32-bit hexadecimal Unicode character value</entry>
       </row>
      </tbody>
      </tgroup>
     </table>

    <para>
     Any other
     character following a backslash is taken literally. Thus, to
     include a backslash character, write two backslashes (<literal>\\</>).
     Also, a single quote can be included in an escape string by writing
     <literal>\'</literal>, in addition to the normal way of <literal>''</>.
    </para>

    <para>
     It is your responsibility that the byte sequences you create,
     especially when using the octal or hexadecimal escapes, compose
     valid characters in the server character set encoding.  When the
     server encoding is UTF-8, then the Unicode escapes or the
     alternative Unicode escape syntax, explained
     in <xref linkend="sql-syntax-strings-uescape">, should be used
     instead.  (The alternative would be doing the UTF-8 encoding by
     hand and writing out the bytes, which would be very cumbersome.)
    </para>

    <para>
     The Unicode escape syntax works fully only when the server
     encoding is UTF-8.  When other server encodings are used, only
     code points in the ASCII range (up to <literal>\u007F</>) can be
     specified.  Both the 4-digit and the 8-digit form can be used to
     specify UTF-16 surrogate pairs to compose characters with code
     points larger than <literal>\FFFF</literal> (although the
     availability of the 8-digit form technically makes this
     unnecessary).
    </para>

    <caution>
    <para>
     If the configuration parameter
     <xref linkend="guc-standard-conforming-strings"> is <literal>off</>,
     then <productname>PostgreSQL</productname> recognizes backslash escapes
     in both regular and escape string constants.  This is for backward
     compatibility with the historical behavior, where backslash escapes
     were always recognized.
     Although <varname>standard_conforming_strings</> currently defaults to
     <literal>off</>, the default will change to <literal>on</> in a future
     release for improved standards compliance.  Applications are therefore
     encouraged to migrate away from using backslash escapes.  If you need
     to use a backslash escape to represent a special character, write the
     string constant with an <literal>E</> to be sure it will be handled the same
     way in future releases.
    </para>

    <para>
     In addition to <varname>standard_conforming_strings</>, the configuration
     parameters <xref linkend="guc-escape-string-warning"> and
     <xref linkend="guc-backslash-quote"> govern treatment of backslashes
     in string constants.
    </para>
    </caution>

    <para>
     The character with the code zero cannot be in a string constant.
    </para>
   </sect3>

   <sect3 id="sql-syntax-strings-uescape">
    <title>String Constants with Unicode Escapes</title>

    <indexterm  zone="sql-syntax-strings-uescape">
     <primary>Unicode escape</primary>
     <secondary>in string constants</secondary>
    </indexterm>

    <para>
     <productname>PostgreSQL</productname> also supports another type
     of escape syntax for strings that allows specifying arbitrary
     Unicode characters by code point.  A Unicode escape string
     constant starts with <literal>U&amp;</literal> (upper or lower case
     letter U followed by ampersand) immediately before the opening
     quote, without any spaces in between, for
     example <literal>U&amp;'foo'</literal>.  (Note that this creates an
     ambiguity with the operator <literal>&amp;</literal>.  Use spaces
     around the operator to avoid this problem.)  Inside the quotes,
     Unicode characters can be specified in escaped form by writing a
     backslash followed by the four-digit hexadecimal code point
     number or alternatively a backslash followed by a plus sign
     followed by a six-digit hexadecimal code point number.  For
     example, the string <literal>'data'</literal> could be written as
<programlisting>
U&amp;'d\0061t\+000061'
</programlisting>
     The following less trivial example writes the Russian
     word <quote>slon</quote> (elephant) in Cyrillic letters:
<programlisting>
U&amp;'\0441\043B\043E\043D'
</programlisting>
    </para>

    <para>
     If a different escape character than backslash is desired, it can
     be specified using
     the <literal>UESCAPE</literal><indexterm><primary>UESCAPE</primary></indexterm>
     clause after the string, for example:
<programlisting>
U&amp;'d!0061t!+000061' UESCAPE '!'
</programlisting>
     The escape character can be any single character other than a
     hexadecimal digit, the plus sign, a single quote, a double quote,
     or a whitespace character.
    </para>

    <para>
     The Unicode escape syntax works only when the server encoding is
     UTF8.  When other server encodings are used, only code points in
     the ASCII range (up to <literal>\007F</literal>) can be
     specified.
     Both the 4-digit and the 6-digit form can be used to specify
     UTF-16 surrogate pairs to compose characters with code points
     larger than <literal>\FFFF</literal> (although the availability
     of the 6-digit form technically makes this unnecessary).
    </para>

    <para>
     Also, the Unicode escape syntax for string constants only works
     when the configuration
     parameter <xref linkend="guc-standard-conforming-strings"> is
     turned on.  This is because otherwise this syntax could confuse
     clients that parse the SQL statements to the point that it could
     lead to SQL injections and similar security issues.  If the
     parameter is set to off, this syntax will be rejected with an
     error message.
    </para>

    <para>
     To include the escape character in the string literally, write it
     twice.
    </para>
   </sect3>

   <sect3 id="sql-syntax-dollar-quoting">
    <title>Dollar-Quoted String Constants</title>

     <indexterm>
      <primary>dollar quoting</primary>
     </indexterm>

    <para>
     While the standard syntax for specifying string constants is usually
     convenient, it can be difficult to understand when the desired string
     contains many single quotes or backslashes, since each of those must
     be doubled. To allow more readable queries in such situations,
     <productname>PostgreSQL</productname> provides another way, called
     <quote>dollar quoting</quote>, to write string constants.
     A dollar-quoted string constant
     consists of a dollar sign (<literal>$</literal>), an optional
     <quote>tag</quote> of zero or more characters, another dollar
     sign, an arbitrary sequence of characters that makes up the
     string content, a dollar sign, the same tag that began this
     dollar quote, and a dollar sign. For example, here are two
     different ways to specify the string <quote>Dianne's horse</>
     using dollar quoting:
<programlisting>
$$Dianne's horse$$
$SomeTag$Dianne's horse$SomeTag$
</programlisting>
     Notice that inside the dollar-quoted string, single quotes can be
     used without needing to be escaped.  Indeed, no characters inside
     a dollar-quoted string are ever escaped: the string content is always
     written literally.  Backslashes are not special, and neither are
     dollar signs, unless they are part of a sequence matching the opening
     tag.
    </para>

    <para>
     It is possible to nest dollar-quoted string constants by choosing
     different tags at each nesting level.  This is most commonly used in
     writing function definitions.  For example:
<programlisting>
$function$
BEGIN
    RETURN ($1 ~ $q$[\t\r\n\v\\]$q$);
END;
$function$
</programlisting>
     Here, the sequence <literal>$q$[\t\r\n\v\\]$q$</> represents a
     dollar-quoted literal string <literal>[\t\r\n\v\\]</>, which will
     be recognized when the function body is executed by
     <productname>PostgreSQL</>.  But since the sequence does not match
     the outer dollar quoting delimiter <literal>$function$</>, it is
     just some more characters within the constant so far as the outer
     string is concerned.
    </para>

    <para>
     The tag, if any, of a dollar-quoted string follows the same rules
     as an unquoted identifier, except that it cannot contain a dollar sign.
     Tags are case sensitive, so <literal>$tag$String content$tag$</literal>
     is correct, but <literal>$TAG$String content$tag$</literal> is not.
    </para>

    <para>
     A dollar-quoted string that follows a keyword or identifier must
     be separated from it by whitespace; otherwise the dollar quoting
     delimiter would be taken as part of the preceding identifier.
    </para>

    <para>
     Dollar quoting is not part of the SQL standard, but it is often a more
     convenient way to write complicated string literals than the
     standard-compliant single quote syntax.  It is particularly useful when
     representing string constants inside other constants, as is often needed
     in procedural function definitions.  With single-quote syntax, each
     backslash in the above example would have to be written as four
     backslashes, which would be reduced to two backslashes in parsing the
     original string constant, and then to one when the inner string constant
     is re-parsed during function execution.
    </para>
   </sect3>

   <sect3 id="sql-syntax-bit-strings">
    <title>Bit-String Constants</title>

    <indexterm zone="sql-syntax-bit-strings">
     <primary>bit string</primary>
     <secondary>constant</secondary>
    </indexterm>

    <para>
     Bit-string constants look like regular string constants with a
     <literal>B</literal> (upper or lower case) immediately before the
     opening quote (no intervening whitespace), e.g.,
     <literal>B'1001'</literal>.  The only characters allowed within
     bit-string constants are <literal>0</literal> and
     <literal>1</literal>.
    </para>

    <para>
     Alternatively, bit-string constants can be specified in hexadecimal
     notation, using a leading <literal>X</literal> (upper or lower case),
     e.g., <literal>X'1FF'</literal>.  This notation is equivalent to
     a bit-string constant with four binary digits for each hexadecimal digit.
    </para>

    <para>
     Both forms of bit-string constant can be continued
     across lines in the same way as regular string constants.
     Dollar quoting cannot be used in a bit-string constant.
    </para>
   </sect3>

   <sect3>
    <title>Numeric Constants</title>

    <indexterm>
     <primary>number</primary>
     <secondary>constant</secondary>
    </indexterm>

    <para>
     Numeric constants are accepted in these general forms:
<synopsis>
<replaceable>digits</replaceable>
<replaceable>digits</replaceable>.<optional><replaceable>digits</replaceable></optional><optional>e<optional>+-</optional><replaceable>digits</replaceable></optional>
<optional><replaceable>digits</replaceable></optional>.<replaceable>digits</replaceable><optional>e<optional>+-</optional><replaceable>digits</replaceable></optional>
<replaceable>digits</replaceable>e<optional>+-</optional><replaceable>digits</replaceable>
</synopsis>
     where <replaceable>digits</replaceable> is one or more decimal
     digits (0 through 9).  At least one digit must be before or after the
     decimal point, if one is used.  At least one digit must follow the
     exponent marker (<literal>e</literal>), if one is present.
     There cannot be any spaces or other characters embedded in the
     constant.  Note that any leading plus or minus sign is not actually
     considered part of the constant; it is an operator applied to the
     constant.
    </para>

    <para>
     These are some examples of valid numeric constants:
<literallayout>
42
3.5
4.
.001
5e2
1.925e-3
</literallayout>
    </para>

    <para>
     <indexterm><primary>integer</primary></indexterm>
     <indexterm><primary>bigint</primary></indexterm>
     <indexterm><primary>numeric</primary></indexterm>
     A numeric constant that contains neither a decimal point nor an
     exponent is initially presumed to be type <type>integer</> if its
     value fits in type <type>integer</> (32 bits); otherwise it is
     presumed to be type <type>bigint</> if its
     value fits in type <type>bigint</> (64 bits); otherwise it is
     taken to be type <type>numeric</>.  Constants that contain decimal
     points and/or exponents are always initially presumed to be type
     <type>numeric</>.
    </para>

    <para>
     The initially assigned data type of a numeric constant is just a
     starting point for the type resolution algorithms.  In most cases
     the constant will be automatically coerced to the most
     appropriate type depending on context.  When necessary, you can
     force a numeric value to be interpreted as a specific data type
     by casting it.<indexterm><primary>type cast</primary></indexterm>
     For example, you can force a numeric value to be treated as type
     <type>real</> (<type>float4</>) by writing:

<programlisting>
REAL '1.23'  -- string style
1.23::REAL   -- PostgreSQL (historical) style
</programlisting>

     These are actually just special cases of the general casting
     notations discussed next.
    </para>
   </sect3>

   <sect3 id="sql-syntax-constants-generic">
    <title>Constants of Other Types</title>

    <indexterm>
     <primary>data type</primary>
     <secondary>constant</secondary>
    </indexterm>

    <para>
     A constant of an <emphasis>arbitrary</emphasis> type can be
     entered using any one of the following notations:
<synopsis>
<replaceable>type</replaceable> '<replaceable>string</replaceable>'
'<replaceable>string</replaceable>'::<replaceable>type</replaceable>
CAST ( '<replaceable>string</replaceable>' AS <replaceable>type</replaceable> )
</synopsis>
     The string constant's text is passed to the input conversion
     routine for the type called <replaceable>type</replaceable>. The
     result is a constant of the indicated type.  The explicit type
     cast can be omitted if there is no ambiguity as to the type the
     constant must be (for example, when it is assigned directly to a
     table column), in which case it is automatically coerced.
    </para>

    <para>
     The string constant can be written using either regular SQL
     notation or dollar-quoting.
    </para>

    <para>
     It is also possible to specify a type coercion using a function-like
     syntax:
<synopsis>
<replaceable>typename</replaceable> ( '<replaceable>string</replaceable>' )
</synopsis>
     but not all type names can be used in this way; see <xref
     linkend="sql-syntax-type-casts"> for details.
    </para>

    <para>
     The <literal>::</literal>, <literal>CAST()</literal>, and
     function-call syntaxes can also be used to specify run-time type
     conversions of arbitrary expressions, as discussed in <xref
     linkend="sql-syntax-type-casts">.  To avoid syntactic ambiguity, the
     <literal><replaceable>type</> '<replaceable>string</>'</literal>
     syntax can only be used to specify the type of a simple literal constant.
     Another restriction on the
     <literal><replaceable>type</> '<replaceable>string</>'</literal>
     syntax is that it does not work for array types; use <literal>::</literal>
     or <literal>CAST()</literal> to specify the type of an array constant.
    </para>

    <para>
     The <literal>CAST()</> syntax conforms to SQL.  The
     <literal><replaceable>type</> '<replaceable>string</>'</literal>
     syntax is a generalization of the standard: SQL specifies this syntax only
     for a few data types, but <productname>PostgreSQL</productname> allows it
     for all types.  The syntax with
     <literal>::</literal> is historical <productname>PostgreSQL</productname>
     usage, as is the function-call syntax.
    </para>
   </sect3>
  </sect2>

  <sect2 id="sql-syntax-operators">
   <title>Operators</title>

   <indexterm zone="sql-syntax-operators">
    <primary>operator</primary>
    <secondary>syntax</secondary>
   </indexterm>

   <para>
    An operator name is a sequence of up to <symbol>NAMEDATALEN</symbol>-1
    (63 by default) characters from the following list:
<literallayout>
+ - * / &lt; &gt; = ~ ! @ # % ^ &amp; | ` ?
</literallayout>

    There are a few restrictions on operator names, however:
    <itemizedlist>
     <listitem>
      <para>
       <literal>--</literal> and <literal>/*</literal> cannot appear
       anywhere in an operator name, since they will be taken as the
       start of a comment.
      </para>
     </listitem>

     <listitem>
      <para>
       A multiple-character operator name cannot end in <literal>+</> or <literal>-</>,
       unless the name also contains at least one of these characters:
<literallayout>
~ ! @ # % ^ &amp; | ` ?
</literallayout>
       For example, <literal>@-</literal> is an allowed operator name,
       but <literal>*-</literal> is not.  This restriction allows
       <productname>PostgreSQL</productname> to parse SQL-compliant
       queries without requiring spaces between tokens.
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <para>
    When working with non-SQL-standard operator names, you will usually
    need to separate adjacent operators with spaces to avoid ambiguity.
    For example, if you have defined a left unary operator named <literal>@</literal>,
    you cannot write <literal>X*@Y</literal>; you must write
    <literal>X* @Y</literal> to ensure that
    <productname>PostgreSQL</productname> reads it as two operator names
    not one.
   </para>
  </sect2>

  <sect2>
   <title>Special Characters</title>

  <para>
   Some characters that are not alphanumeric have a special meaning
   that is different from being an operator.  Details on the usage can
   be found at the location where the respective syntax element is
   described.  This section only exists to advise the existence and
   summarize the purposes of these characters.

   <itemizedlist>
    <listitem>
     <para>
      A dollar sign (<literal>$</literal>) followed by digits is used
      to represent a positional parameter in the body of a function
      definition or a prepared statement.  In other contexts the
      dollar sign can be part of an identifier or a dollar-quoted string
      constant.
     </para>
    </listitem>

    <listitem>
     <para>
      Parentheses (<literal>()</literal>) have their usual meaning to
      group expressions and enforce precedence.  In some cases
      parentheses are required as part of the fixed syntax of a
      particular SQL command.
     </para>
    </listitem>

    <listitem>
     <para>
      Brackets (<literal>[]</literal>) are used to select the elements
      of an array.  See <xref linkend="arrays"> for more information
      on arrays.
     </para>
    </listitem>

    <listitem>
     <para>
      Commas (<literal>,</literal>) are used in some syntactical
      constructs to separate the elements of a list.
     </para>
    </listitem>

    <listitem>
     <para>
      The semicolon (<literal>;</literal>) terminates an SQL command.
      It cannot appear anywhere within a command, except within a
      string constant or quoted identifier.
     </para>
    </listitem>

    <listitem>
     <para>
      The colon (<literal>:</literal>) is used to select
      <quote>slices</quote> from arrays. (See <xref
      linkend="arrays">.)  In certain SQL dialects (such as Embedded
      SQL), the colon is used to prefix variable names.
     </para>
    </listitem>

    <listitem>
     <para>
      The asterisk (<literal>*</literal>) is used in some contexts to denote
      all the fields of a table row or composite value.  It also
      has a special meaning when used as the argument of an
      aggregate function, namely that the aggregate does not require
      any explicit parameter.
     </para>
    </listitem>

    <listitem>
     <para>
      The period (<literal>.</literal>) is used in numeric
      constants, and to separate schema, table, and column names.
     </para>
    </listitem>
   </itemizedlist>

   </para>
  </sect2>

  <sect2 id="sql-syntax-comments">
   <title>Comments</title>

   <indexterm zone="sql-syntax-comments">
    <primary>comment</primary>
    <secondary sortas="SQL">in SQL</secondary>
   </indexterm>

   <para>
    A comment is a sequence of characters beginning with
    double dashes and extending to the end of the line, e.g.:
<programlisting>
-- This is a standard SQL comment
</programlisting>
   </para>

   <para>
    Alternatively, C-style block comments can be used:
<programlisting>
/* multiline comment
 * with nesting: /* nested block comment */
 */
</programlisting>
    where the comment begins with <literal>/*</literal> and extends to
    the matching occurrence of <literal>*/</literal>. These block
    comments nest, as specified in the SQL standard but unlike C, so that one can
    comment out larger blocks of code that might contain existing block
    comments.
   </para>

   <para>
    A comment is removed from the input stream before further syntax
    analysis and is effectively replaced by whitespace.
   </para>
  </sect2>

  <sect2 id="sql-precedence">
   <title>Lexical Precedence</title>

   <indexterm zone="sql-precedence">
    <primary>operator</primary>
    <secondary>precedence</secondary>
   </indexterm>

   <para>
    <xref linkend="sql-precedence-table"> shows the precedence and
    associativity of the operators in <productname>PostgreSQL</>.
    Most operators have the same precedence and are left-associative.
    The precedence and associativity of the operators is hard-wired
    into the parser.  This can lead to non-intuitive behavior; for
    example the Boolean operators <literal>&lt;</> and
    <literal>&gt;</> have a different precedence than the Boolean
    operators <literal>&lt;=</> and <literal>&gt;=</>.  Also, you will
    sometimes need to add parentheses when using combinations of
    binary and unary operators.  For instance:
<programlisting>
SELECT 5 ! - 6;
</programlisting>
   will be parsed as:
<programlisting>
SELECT 5 ! (- 6);
</programlisting>
    because the parser has no idea &mdash; until it is too late
    &mdash; that <token>!</token> is defined as a postfix operator,
    not an infix one.  To get the desired behavior in this case, you
    must write:
<programlisting>
SELECT (5 !) - 6;
</programlisting>
    This is the price one pays for extensibility.
   </para>

   <table id="sql-precedence-table">
    <title>Operator Precedence (decreasing)</title>

    <tgroup cols="3">
     <thead>
      <row>
       <entry>Operator/Element</entry>
       <entry>Associativity</entry>
       <entry>Description</entry>
      </row>
     </thead>

     <tbody>
      <row>
       <entry><token>.</token></entry>
       <entry>left</entry>
       <entry>table/column name separator</entry>
      </row>

      <row>
       <entry><token>::</token></entry>
       <entry>left</entry>
       <entry><productname>PostgreSQL</productname>-style typecast</entry>
      </row>

      <row>
       <entry><token>[</token> <token>]</token></entry>
       <entry>left</entry>
       <entry>array element selection</entry>
      </row>

      <row>
       <entry><token>-</token></entry>
       <entry>right</entry>
       <entry>unary minus</entry>
      </row>

      <row>
       <entry><token>^</token></entry>
       <entry>left</entry>
       <entry>exponentiation</entry>
      </row>

      <row>
       <entry><token>*</token> <token>/</token> <token>%</token></entry>
       <entry>left</entry>
       <entry>multiplication, division, modulo</entry>
      </row>

      <row>
       <entry><token>+</token> <token>-</token></entry>
       <entry>left</entry>
       <entry>addition, subtraction</entry>
      </row>

      <row>
       <entry><token>IS</token></entry>
       <entry></entry>
       <entry><literal>IS TRUE</>, <literal>IS FALSE</>, <literal>IS UNKNOWN</>, <literal>IS NULL</></entry>
      </row>

      <row>
       <entry><token>ISNULL</token></entry>
       <entry></entry>
       <entry>test for null</entry>
      </row>

      <row>
       <entry><token>NOTNULL</token></entry>
       <entry></entry>
       <entry>test for not null</entry>
      </row>

      <row>
       <entry>(any other)</entry>
       <entry>left</entry>
       <entry>all other native and user-defined operators</entry>
      </row>

      <row>
       <entry><token>IN</token></entry>
       <entry></entry>
       <entry>set membership</entry>
      </row>

      <row>
       <entry><token>BETWEEN</token></entry>
       <entry></entry>
       <entry>range containment</entry>
      </row>

      <row>
       <entry><token>OVERLAPS</token></entry>
       <entry></entry>
       <entry>time interval overlap</entry>
      </row>

      <row>
       <entry><token>LIKE</token> <token>ILIKE</token> <token>SIMILAR</token></entry>
       <entry></entry>
       <entry>string pattern matching</entry>
      </row>

      <row>
       <entry><token>&lt;</token> <token>&gt;</token></entry>
       <entry></entry>
       <entry>less than, greater than</entry>
      </row>

      <row>
       <entry><token>=</token></entry>
       <entry>right</entry>
       <entry>equality, assignment</entry>
      </row>

      <row>
       <entry><token>NOT</token></entry>
       <entry>right</entry>
       <entry>logical negation</entry>
      </row>

      <row>
       <entry><token>AND</token></entry>
       <entry>left</entry>
       <entry>logical conjunction</entry>
      </row>

      <row>
       <entry><token>OR</token></entry>
       <entry>left</entry>
       <entry>logical disjunction</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    Note that the operator precedence rules also apply to user-defined
    operators that have the same names as the built-in operators
    mentioned above.  For example, if you define a
    <quote>+</quote> operator for some custom data type it will have
    the same precedence as the built-in <quote>+</quote> operator, no
    matter what yours does.
   </para>

   <para>
    When a schema-qualified operator name is used in the
    <literal>OPERATOR</> syntax, as for example in:
<programlisting>
SELECT 3 OPERATOR(pg_catalog.+) 4;
</programlisting>
    the <literal>OPERATOR</> construct is taken to have the default precedence
    shown in <xref linkend="sql-precedence-table"> for <quote>any other</> operator.  This is true no matter
    which specific operator appears inside <literal>OPERATOR()</>.
   </para>
  </sect2>
 </sect1>

 <sect1 id="sql-expressions">
  <title>Value Expressions</title>

  <indexterm zone="sql-expressions">
   <primary>expression</primary>
   <secondary>syntax</secondary>
  </indexterm>

  <indexterm zone="sql-expressions">
   <primary>value expression</primary>
  </indexterm>

  <indexterm>
   <primary>scalar</primary>
   <see>expression</see>
  </indexterm>

  <para>
   Value expressions are used in a variety of contexts, such
   as in the target list of the <command>SELECT</command> command, as
   new column values in <command>INSERT</command> or
   <command>UPDATE</command>, or in search conditions in a number of
   commands.  The result of a value expression is sometimes called a
   <firstterm>scalar</firstterm>, to distinguish it from the result of
   a table expression (which is a table).  Value expressions are
   therefore also called <firstterm>scalar expressions</firstterm> (or
   even simply <firstterm>expressions</firstterm>).  The expression
   syntax allows the calculation of values from primitive parts using
   arithmetic, logical, set, and other operations.
  </para>

  <para>
   A value expression is one of the following:

   <itemizedlist>
    <listitem>
     <para>
      A constant or literal value
     </para>
    </listitem>

    <listitem>
     <para>
      A column reference
     </para>
    </listitem>

    <listitem>
     <para>
      A positional parameter reference, in the body of a function definition
      or prepared statement
     </para>
    </listitem>

    <listitem>
     <para>
      A subscripted expression
     </para>
    </listitem>

    <listitem>
     <para>
      A field selection expression
     </para>
    </listitem>

    <listitem>
     <para>
      An operator invocation
     </para>
    </listitem>

    <listitem>
     <para>
      A function call
     </para>
    </listitem>

    <listitem>
     <para>
      An aggregate expression
     </para>
    </listitem>

    <listitem>
     <para>
      A window function call
     </para>
    </listitem>

    <listitem>
     <para>
      A type cast
     </para>
    </listitem>

    <listitem>
     <para>
      A scalar subquery
     </para>
    </listitem>

    <listitem>
     <para>
      An array constructor
     </para>
    </listitem>

    <listitem>
     <para>
      A row constructor
     </para>
    </listitem>

    <listitem>
     <para>
      Another value expression in parentheses (used to group
      subexpressions and override
      precedence<indexterm><primary>parenthesis</></>)
     </para>
    </listitem>
   </itemizedlist>
  </para>

  <para>
   In addition to this list, there are a number of constructs that can
   be classified as an expression but do not follow any general syntax
   rules.  These generally have the semantics of a function or
   operator and are explained in the appropriate location in <xref
   linkend="functions">.  An example is the <literal>IS NULL</literal>
   clause.
  </para>

  <para>
   We have already discussed constants in <xref
   linkend="sql-syntax-constants">.  The following sections discuss
   the remaining options.
  </para>

  <sect2>
   <title>Column References</title>

   <indexterm>
    <primary>column reference</primary>
   </indexterm>

   <para>
    A column can be referenced in the form:
<synopsis>
<replaceable>correlation</replaceable>.<replaceable>columnname</replaceable>
</synopsis>
   </para>

   <para>
    <replaceable>correlation</replaceable> is the name of a
    table (possibly qualified with a schema name), or an alias for a table
    defined by means of a <literal>FROM</literal> clause, or one of
    the key words <literal>NEW</literal> or <literal>OLD</literal>.
    (<literal>NEW</literal> and <literal>OLD</literal> can only appear in rewrite rules,
    while other correlation names can be used in any SQL statement.)
    The correlation name and separating dot can be omitted if the column name
    is unique across all the tables being used in the current query.  (See also <xref linkend="queries">.)
   </para>
  </sect2>

  <sect2>
   <title>Positional Parameters</title>

   <indexterm>
    <primary>parameter</primary>
    <secondary>syntax</secondary>
   </indexterm>

   <indexterm>
    <primary>$</primary>
   </indexterm>

   <para>
    A positional parameter reference is used to indicate a value
    that is supplied externally to an SQL statement.  Parameters are
    used in SQL function definitions and in prepared queries.  Some
    client libraries also support specifying data values separately
    from the SQL command string, in which case parameters are used to
    refer to the out-of-line data values.
    The form of a parameter reference is:
<synopsis>
$<replaceable>number</replaceable>
</synopsis>
   </para>

   <para>
    For example, consider the definition of a function,
    <function>dept</function>, as:

<programlisting>
CREATE FUNCTION dept(text) RETURNS dept
    AS $$ SELECT * FROM dept WHERE name = $1 $$
    LANGUAGE SQL;
</programlisting>

    Here the <literal>$1</literal> references the value of the first
    function argument whenever the function is invoked.
   </para>
  </sect2>

  <sect2>
   <title>Subscripts</title>

   <indexterm>
    <primary>subscript</primary>
   </indexterm>

   <para>
    If an expression yields a value of an array type, then a specific
    element of the array value can be extracted by writing
<synopsis>
<replaceable>expression</replaceable>[<replaceable>subscript</replaceable>]
</synopsis>
    or multiple adjacent elements (an <quote>array slice</>) can be extracted
    by writing
<synopsis>
<replaceable>expression</replaceable>[<replaceable>lower_subscript</replaceable>:<replaceable>upper_subscript</replaceable>]
</synopsis>
    (Here, the brackets <literal>[ ]</literal> are meant to appear literally.)
    Each <replaceable>subscript</replaceable> is itself an expression,
    which must yield an integer value.
   </para>

   <para>
    In general the array <replaceable>expression</replaceable> must be
    parenthesized, but the parentheses can be omitted when the expression
    to be subscripted is just a column reference or positional parameter.
    Also, multiple subscripts can be concatenated when the original array
    is multidimensional.
    For example:

<programlisting>
mytable.arraycolumn[4]
mytable.two_d_column[17][34]
$1[10:42]
(arrayfunction(a,b))[42]
</programlisting>

    The parentheses in the last example are required.
    See <xref linkend="arrays"> for more about arrays.
   </para>
  </sect2>

  <sect2>
   <title>Field Selection</title>

   <indexterm>
    <primary>field selection</primary>
   </indexterm>

   <para>
    If an expression yields a value of a composite type (row type), then a
    specific field of the row can be extracted by writing
<synopsis>
<replaceable>expression</replaceable>.<replaceable>fieldname</replaceable>
</synopsis>
   </para>

   <para>
    In general the row <replaceable>expression</replaceable> must be
    parenthesized, but the parentheses can be omitted when the expression
    to be selected from is just a table reference or positional parameter.
    For example:

<programlisting>
mytable.mycolumn
$1.somecolumn
(rowfunction(a,b)).col3
</programlisting>

    (Thus, a qualified column reference is actually just a special case
    of the field selection syntax.)  An important special case is
    extracting a field from a table column that is of a composite type:

<programlisting>
(compositecol).somefield
(mytable.compositecol).somefield
</programlisting>

    The parentheses are required here to show that
    <structfield>compositecol</> is a column name not a table name,
    or that <structname>mytable</> is a table name not a schema name
    in the second case.
   </para>
  </sect2>

  <sect2>
   <title>Operator Invocations</title>

   <indexterm>
    <primary>operator</primary>
    <secondary>invocation</secondary>
   </indexterm>

   <para>
    There are three possible syntaxes for an operator invocation:
    <simplelist>
     <member><replaceable>expression</replaceable> <replaceable>operator</replaceable> <replaceable>expression</replaceable> (binary infix operator)</member>
     <member><replaceable>operator</replaceable> <replaceable>expression</replaceable> (unary prefix operator)</member>
     <member><replaceable>expression</replaceable> <replaceable>operator</replaceable> (unary postfix operator)</member>
    </simplelist>
    where the <replaceable>operator</replaceable> token follows the syntax
    rules of <xref linkend="sql-syntax-operators">, or is one of the
    key words <token>AND</token>, <token>OR</token>, and
    <token>NOT</token>, or is a qualified operator name in the form:
<synopsis>
<literal>OPERATOR(</><replaceable>schema</><literal>.</><replaceable>operatorname</><literal>)</>
</synopsis>
    Which particular operators exist and whether
    they are unary or binary depends on what operators have been
    defined by the system or the user.  <xref linkend="functions">
    describes the built-in operators.
   </para>
  </sect2>

  <sect2>
   <title>Function Calls</title>

   <indexterm>
    <primary>function</primary>
    <secondary>invocation</secondary>
   </indexterm>

   <para>
    The syntax for a function call is the name of a function
    (possibly qualified with a schema name), followed by its argument list
    enclosed in parentheses:

<synopsis>
<replaceable>function_name</replaceable> (<optional><replaceable>expression</replaceable> <optional>, <replaceable>expression</replaceable> ... </optional></optional> )
</synopsis>
   </para>

   <para>
    For example, the following computes the square root of 2:
<programlisting>
sqrt(2)
</programlisting>
   </para>

   <para>
    The list of built-in functions is in <xref linkend="functions">.
    Other functions can be added by the user.
   </para>

   <para>
    The arguments can optionally have names attached.
    See <xref linkend="sql-syntax-calling-funcs"> for details.
   </para>
  </sect2>

  <sect2 id="syntax-aggregates">
   <title>Aggregate Expressions</title>

   <indexterm zone="syntax-aggregates">
    <primary>aggregate function</primary>
    <secondary>invocation</secondary>
   </indexterm>

   <para>
    An <firstterm>aggregate expression</firstterm> represents the
    application of an aggregate function across the rows selected by a
    query.  An aggregate function reduces multiple inputs to a single
    output value, such as the sum or average of the inputs.  The
    syntax of an aggregate expression is one of the following:

<synopsis>
<replaceable>aggregate_name</replaceable> (<replaceable>expression</replaceable> [ , ... ] )
<replaceable>aggregate_name</replaceable> (ALL <replaceable>expression</replaceable> [ , ... ] )
<replaceable>aggregate_name</replaceable> (DISTINCT <replaceable>expression</replaceable>)
<replaceable>aggregate_name</replaceable> ( * )
</synopsis>

    where <replaceable>aggregate_name</replaceable> is a previously
    defined aggregate (possibly qualified with a schema name), and
    <replaceable>expression</replaceable> is
    any value expression that does not itself contain an aggregate
    expression or a window function call.
   </para>

   <para>
    The first form of aggregate expression invokes the aggregate
    across all input rows for which the given expression(s) yield
    non-null values.  (Actually, it is up to the aggregate function
    whether to ignore null values or not &mdash; but all the standard ones do.)
    The second form is the same as the first, since
    <literal>ALL</literal> is the default.  The third form invokes the
    aggregate for all distinct non-null values of the expressions found
    in the input rows.  The last form invokes the aggregate once for
    each input row regardless of null or non-null values; since no
    particular input value is specified, it is generally only useful
    for the <function>count(*)</function> aggregate function.
   </para>

   <para>
    For example, <literal>count(*)</literal> yields the total number
    of input rows; <literal>count(f1)</literal> yields the number of
    input rows in which <literal>f1</literal> is non-null;
    <literal>count(distinct f1)</literal> yields the number of
    distinct non-null values of <literal>f1</literal>.
   </para>

   <para>
    The predefined aggregate functions are described in <xref
    linkend="functions-aggregate">.  Other aggregate functions can be added
    by the user.
   </para>

   <para>
    An aggregate expression can only appear in the result list or
    <literal>HAVING</> clause of a <command>SELECT</> command.
    It is forbidden in other clauses, such as <literal>WHERE</>,
    because those clauses are logically evaluated before the results
    of aggregates are formed.
   </para>

   <para>
    When an aggregate expression appears in a subquery (see
    <xref linkend="sql-syntax-scalar-subqueries"> and
    <xref linkend="functions-subquery">), the aggregate is normally
    evaluated over the rows of the subquery.  But an exception occurs
    if the aggregate's arguments contain only outer-level variables:
    the aggregate then belongs to the nearest such outer level, and is
    evaluated over the rows of that query.  The aggregate expression
    as a whole is then an outer reference for the subquery it appears in,
    and acts as a constant over any one evaluation of that subquery.
    The restriction about
    appearing only in the result list or <literal>HAVING</> clause
    applies with respect to the query level that the aggregate belongs to.
   </para>

   <note>
    <para>
     <productname>PostgreSQL</productname> currently does not support
     <literal>DISTINCT</> with more than one input expression.
    </para>
   </note>
  </sect2>

  <sect2 id="syntax-window-functions">
   <title>Window Function Calls</title>

   <indexterm zone="syntax-window-functions">
    <primary>window function</primary>
    <secondary>invocation</secondary>
   </indexterm>

   <indexterm zone="syntax-window-functions">
    <primary>OVER clause</primary>
   </indexterm>

   <para>
    A <firstterm>window function call</firstterm> represents the application
    of an aggregate-like function over some portion of the rows selected
    by a query.  Unlike regular aggregate function calls, this is not tied
    to grouping of the selected rows into a single output row &mdash; each
    row remains separate in the query output.  However the window function
    is able to scan all the rows that would be part of the current row's
    group according to the grouping specification (<literal>PARTITION BY</>
    list) of the window function call.
    The syntax of a window function call is one of the following:

<synopsis>
<replaceable>function_name</replaceable> (<optional><replaceable>expression</replaceable> <optional>, <replaceable>expression</replaceable> ... </optional></optional>) OVER ( <replaceable class="parameter">window_definition</replaceable> )
<replaceable>function_name</replaceable> (<optional><replaceable>expression</replaceable> <optional>, <replaceable>expression</replaceable> ... </optional></optional>) OVER <replaceable>window_name</replaceable>
<replaceable>function_name</replaceable> ( * ) OVER ( <replaceable class="parameter">window_definition</replaceable> )
<replaceable>function_name</replaceable> ( * ) OVER <replaceable>window_name</replaceable>
</synopsis>
    where <replaceable class="parameter">window_definition</replaceable>
    has the syntax
<synopsis>
[ <replaceable class="parameter">existing_window_name</replaceable> ]
[ PARTITION BY <replaceable class="parameter">expression</replaceable> [, ...] ]
[ ORDER BY <replaceable class="parameter">expression</replaceable> [ ASC | DESC | USING <replaceable class="parameter">operator</replaceable> ] [ NULLS { FIRST | LAST } ] [, ...] ]
[ <replaceable class="parameter">frame_clause</replaceable> ]
</synopsis>
    and the optional <replaceable class="parameter">frame_clause</replaceable>
    can be one of
<synopsis>
RANGE UNBOUNDED PRECEDING
RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW
RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING
ROWS UNBOUNDED PRECEDING
ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW
ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING
</synopsis>

    Here, <replaceable>expression</replaceable> represents any value
    expression that does not itself contain window function calls.
    The <literal>PARTITION BY</> and <literal>ORDER BY</> lists have
    essentially the same syntax and semantics as <literal>GROUP BY</>
    and <literal>ORDER BY</> clauses of the whole query, except that their
    expressions are always just expressions and cannot be output-column
    names or numbers.
    <replaceable>window_name</replaceable> is a reference to a named window
    specification defined in the query's <literal>WINDOW</literal> clause.
    Named window specifications are usually referenced with just
    <literal>OVER</> <replaceable>window_name</replaceable>, but it is
    also possible to write a window name inside the parentheses and then
    optionally supply an ordering clause and/or frame clause (the referenced
    window must lack these clauses, if they are supplied here).
    This latter syntax follows the same rules as modifying an existing
    window name within the <literal>WINDOW</literal> clause; see the
    <xref linkend="sql-select" endterm="sql-select-title"> reference
    page for details.
   </para>

   <para>
    The <replaceable class="parameter">frame_clause</replaceable> specifies
    the set of rows constituting the <firstterm>window frame</>, for those
    window functions that act on the frame instead of the whole partition.
    The default framing option is <literal>RANGE UNBOUNDED PRECEDING</>,
    which is the same as <literal>RANGE BETWEEN UNBOUNDED PRECEDING AND
    CURRENT ROW</>; it selects rows up through the current row's last
    peer in the <literal>ORDER BY</> ordering (which means all rows if
    there is no <literal>ORDER BY</>).  The options
    <literal>RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING</> and
    <literal>ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING</>
    are also equivalent: they always select all rows in the partition.
    Lastly, <literal>ROWS UNBOUNDED PRECEDING</> or its verbose equivalent
    <literal>ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW</> select
    all rows up through the current row (regardless of duplicates).
    Beware that this option can produce implementation-dependent results
    if the <literal>ORDER BY</> ordering does not order the rows uniquely.
   </para>

   <para>
    The built-in window functions are described in <xref
    linkend="functions-window-table">.  Other window functions can be added by
    the user.  Also, any built-in or user-defined aggregate function can be
    used as a window function.
   </para>

   <para>
    The syntaxes using <literal>*</> are used for calling parameter-less
    aggregate functions as window functions, for example
    <literal>count(*) OVER (PARTITION BY x ORDER BY y)</>.
    <literal>*</> is customarily not used for non-aggregate window functions.
    Aggregate window functions, unlike normal aggregate functions, do not
    allow <literal>DISTINCT</> to be used within the function argument list.
   </para>

   <para>
    Window function calls are permitted only in the <literal>SELECT</literal>
    list and the <literal>ORDER BY</> clause of the query.
   </para>

   <para>
    More information about window functions can be found in
    <xref linkend="tutorial-window"> and
    <xref linkend="queries-window">.
   </para>
  </sect2>

  <sect2 id="sql-syntax-type-casts">
   <title>Type Casts</title>

   <indexterm>
    <primary>data type</primary>
    <secondary>type cast</secondary>
   </indexterm>

   <indexterm>
    <primary>type cast</primary>
   </indexterm>

   <para>
    A type cast specifies a conversion from one data type to another.
    <productname>PostgreSQL</productname> accepts two equivalent syntaxes
    for type casts:
<synopsis>
CAST ( <replaceable>expression</replaceable> AS <replaceable>type</replaceable> )
<replaceable>expression</replaceable>::<replaceable>type</replaceable>
</synopsis>
    The <literal>CAST</> syntax conforms to SQL; the syntax with
    <literal>::</literal> is historical <productname>PostgreSQL</productname>
    usage.
   </para>

   <para>
    When a cast is applied to a value expression of a known type, it
    represents a run-time type conversion.  The cast will succeed only
    if a suitable type conversion operation has been defined.  Notice that this
    is subtly different from the use of casts with constants, as shown in
    <xref linkend="sql-syntax-constants-generic">.  A cast applied to an
    unadorned string literal represents the initial assignment of a type
    to a literal constant value, and so it will succeed for any type
    (if the contents of the string literal are acceptable input syntax for the
    data type).
   </para>

   <para>
    An explicit type cast can usually be omitted if there is no ambiguity as
    to the type that a value expression must produce (for example, when it is
    assigned to a table column); the system will automatically apply a
    type cast in such cases.  However, automatic casting is only done for
    casts that are marked <quote>OK to apply implicitly</>
    in the system catalogs.  Other casts must be invoked with
    explicit casting syntax.  This restriction is intended to prevent
    surprising conversions from being applied silently.
   </para>

   <para>
    It is also possible to specify a type cast using a function-like
    syntax:
<synopsis>
<replaceable>typename</replaceable> ( <replaceable>expression</replaceable> )
</synopsis>
    However, this only works for types whose names are also valid as
    function names.  For example, <literal>double precision</literal>
    cannot be used this way, but the equivalent <literal>float8</literal>
    can.  Also, the names <literal>interval</>, <literal>time</>, and
    <literal>timestamp</> can only be used in this fashion if they are
    double-quoted, because of syntactic conflicts.  Therefore, the use of
    the function-like cast syntax leads to inconsistencies and should
    probably be avoided.
   </para>

   <note>
    <para>
     The function-like syntax is in fact just a function call.  When
     one of the two standard cast syntaxes is used to do a run-time
     conversion, it will internally invoke a registered function to
     perform the conversion.  By convention, these conversion functions
     have the same name as their output type, and thus the <quote>function-like
     syntax</> is nothing more than a direct invocation of the underlying
     conversion function.  Obviously, this is not something that a portable
     application should rely on.  For further details see
     <xref linkend="sql-createcast" endterm="sql-createcast-title">.
    </para>
   </note>
  </sect2>

  <sect2 id="sql-syntax-scalar-subqueries">
   <title>Scalar Subqueries</title>

   <indexterm>
    <primary>subquery</primary>
   </indexterm>

   <para>
    A scalar subquery is an ordinary
    <command>SELECT</command> query in parentheses that returns exactly one
    row with one column.  (See <xref linkend="queries"> for information about writing queries.)
    The <command>SELECT</command> query is executed
    and the single returned value is used in the surrounding value expression.
    It is an error to use a query that
    returns more than one row or more than one column as a scalar subquery.
    (But if, during a particular execution, the subquery returns no rows,
    there is no error; the scalar result is taken to be null.)
    The subquery can refer to variables from the surrounding query,
    which will act as constants during any one evaluation of the subquery.
    See also <xref linkend="functions-subquery"> for other expressions involving subqueries.
   </para>

   <para>
    For example, the following finds the largest city population in each
    state:
<programlisting>
SELECT name, (SELECT max(pop) FROM cities WHERE cities.state = states.name)
    FROM states;
</programlisting>
   </para>
  </sect2>

  <sect2 id="sql-syntax-array-constructors">
   <title>Array Constructors</title>

   <indexterm>
    <primary>array</primary>
    <secondary>constructor</secondary>
   </indexterm>

   <indexterm>
    <primary>ARRAY</primary>
   </indexterm>

   <para>
    An array constructor is an expression that builds an
    array value using values for its member elements.  A simple array
    constructor
    consists of the key word <literal>ARRAY</literal>, a left square bracket
    <literal>[</>, a list of expressions (separated by commas) for the
    array element values, and finally a right square bracket <literal>]</>.
    For example:
<programlisting>
SELECT ARRAY[1,2,3+4];
  array
---------
 {1,2,7}
(1 row)
</programlisting>
    By default,
    the array element type is the common type of the member expressions,
    determined using the same rules as for <literal>UNION</> or
    <literal>CASE</> constructs (see <xref linkend="typeconv-union-case">).
    You can override this by explicitly casting the array constructor to the
    desired type, for example:
<programlisting>
SELECT ARRAY[1,2,22.7]::integer[];
  array
----------
 {1,2,23}
(1 row)
</programlisting>
    This has the same effect as casting each expression to the array
    element type individually.
    For more on casting, see <xref linkend="sql-syntax-type-casts">.
   </para>

   <para>
    Multidimensional array values can be built by nesting array
    constructors.
    In the inner constructors, the key word <literal>ARRAY</literal> can
    be omitted.  For example, these produce the same result:

<programlisting>
SELECT ARRAY[ARRAY[1,2], ARRAY[3,4]];
     array
---------------
 {{1,2},{3,4}}
(1 row)

SELECT ARRAY[[1,2],[3,4]];
     array
---------------
 {{1,2},{3,4}}
(1 row)
</programlisting>

    Since multidimensional arrays must be rectangular, inner constructors
    at the same level must produce sub-arrays of identical dimensions.
    Any cast applied to the outer <literal>ARRAY</> constructor propagates
    automatically to all the inner constructors.
  </para>

  <para>
    Multidimensional array constructor elements can be anything yielding
    an array of the proper kind, not only a sub-<literal>ARRAY</> construct.
    For example:
<programlisting>
CREATE TABLE arr(f1 int[], f2 int[]);

INSERT INTO arr VALUES (ARRAY[[1,2],[3,4]], ARRAY[[5,6],[7,8]]);

SELECT ARRAY[f1, f2, '{{9,10},{11,12}}'::int[]] FROM arr;
                     array
------------------------------------------------
 {{{1,2},{3,4}},{{5,6},{7,8}},{{9,10},{11,12}}}
(1 row)
</programlisting>
  </para>

  <para>
   You can construct an empty array, but since it's impossible to have an
   array with no type, you must explicitly cast your empty array to the
   desired type.  For example:
<programlisting>
SELECT ARRAY[]::integer[];
 array
-------
 {}
(1 row)
</programlisting>
  </para>

  <para>
   It is also possible to construct an array from the results of a
   subquery.  In this form, the array constructor is written with the
   key word <literal>ARRAY</literal> followed by a parenthesized (not
   bracketed) subquery. For example:
<programlisting>
SELECT ARRAY(SELECT oid FROM pg_proc WHERE proname LIKE 'bytea%');
                          ?column?
-------------------------------------------------------------
 {2011,1954,1948,1952,1951,1244,1950,2005,1949,1953,2006,31}
(1 row)
</programlisting>
   The subquery must return a single column. The resulting
   one-dimensional array will have an element for each row in the
   subquery result, with an element type matching that of the
   subquery's output column.
  </para>

  <para>
   The subscripts of an array value built with <literal>ARRAY</literal>
   always begin with one.  For more information about arrays, see
   <xref linkend="arrays">.
  </para>

  </sect2>

  <sect2 id="sql-syntax-row-constructors">
   <title>Row Constructors</title>

   <indexterm>
    <primary>composite type</primary>
    <secondary>constructor</secondary>
   </indexterm>

   <indexterm>
    <primary>row type</primary>
    <secondary>constructor</secondary>
   </indexterm>

   <indexterm>
    <primary>ROW</primary>
   </indexterm>

   <para>
    A row constructor is an expression that builds a row value (also
    called a composite value) using values
    for its member fields.  A row constructor consists of the key word
    <literal>ROW</literal>, a left parenthesis, zero or more
    expressions (separated by commas) for the row field values, and finally
    a right parenthesis.  For example:
<programlisting>
SELECT ROW(1,2.5,'this is a test');
</programlisting>
    The key word <literal>ROW</> is optional when there is more than one
    expression in the list.
   </para>

   <para>
    A row constructor can include the syntax
    <replaceable>rowvalue</replaceable><literal>.*</literal>,
    which will be expanded to a list of the elements of the row value,
    just as occurs when the <literal>.*</> syntax is used at the top level
    of a <command>SELECT</> list.  For example, if table <literal>t</> has
    columns <literal>f1</> and <literal>f2</>, these are the same:
<programlisting>
SELECT ROW(t.*, 42) FROM t;
SELECT ROW(t.f1, t.f2, 42) FROM t;
</programlisting>
   </para>

   <note>
    <para>
     Before <productname>PostgreSQL</productname> 8.2, the
     <literal>.*</literal> syntax was not expanded, so that writing
     <literal>ROW(t.*, 42)</> created a two-field row whose first field
     was another row value.  The new behavior is usually more useful.
     If you need the old behavior of nested row values, write the inner
     row value without <literal>.*</literal>, for instance
     <literal>ROW(t, 42)</>.
    </para>
   </note>

   <para>
    By default, the value created by a <literal>ROW</> expression is of
    an anonymous record type.  If necessary, it can be cast to a named
    composite type &mdash; either the row type of a table, or a composite type
    created with <command>CREATE TYPE AS</>.  An explicit cast might be needed
    to avoid ambiguity.  For example:
<programlisting>
CREATE TABLE mytable(f1 int, f2 float, f3 text);

CREATE FUNCTION getf1(mytable) RETURNS int AS 'SELECT $1.f1' LANGUAGE SQL;

-- No cast needed since only one getf1() exists
SELECT getf1(ROW(1,2.5,'this is a test'));
 getf1
-------
     1
(1 row)

CREATE TYPE myrowtype AS (f1 int, f2 text, f3 numeric);

CREATE FUNCTION getf1(myrowtype) RETURNS int AS 'SELECT $1.f1' LANGUAGE SQL;

-- Now we need a cast to indicate which function to call:
SELECT getf1(ROW(1,2.5,'this is a test'));
ERROR:  function getf1(record) is not unique

SELECT getf1(ROW(1,2.5,'this is a test')::mytable);
 getf1
-------
     1
(1 row)

SELECT getf1(CAST(ROW(11,'this is a test',2.5) AS myrowtype));
 getf1
-------
    11
(1 row)
</programlisting>
  </para>

  <para>
   Row constructors can be used to build composite values to be stored
   in a composite-type table column, or to be passed to a function that
   accepts a composite parameter.  Also,
   it is possible to compare two row values or test a row with
   <literal>IS NULL</> or <literal>IS NOT NULL</>, for example:
<programlisting>
SELECT ROW(1,2.5,'this is a test') = ROW(1, 3, 'not the same');

SELECT ROW(table.*) IS NULL FROM table;  -- detect all-null rows
</programlisting>
   For more detail see <xref linkend="functions-comparisons">.
   Row constructors can also be used in connection with subqueries,
   as discussed in <xref linkend="functions-subquery">.
  </para>

  </sect2>

  <sect2 id="syntax-express-eval">
   <title>Expression Evaluation Rules</title>

   <indexterm>
    <primary>expression</primary>
    <secondary>order of evaluation</secondary>
   </indexterm>

   <para>
    The order of evaluation of subexpressions is not defined.  In
    particular, the inputs of an operator or function are not necessarily
    evaluated left-to-right or in any other fixed order.
   </para>

   <para>
    Furthermore, if the result of an expression can be determined by
    evaluating only some parts of it, then other subexpressions
    might not be evaluated at all.  For instance, if one wrote:
<programlisting>
SELECT true OR somefunc();
</programlisting>
    then <literal>somefunc()</literal> would (probably) not be called
    at all. The same would be the case if one wrote:
<programlisting>
SELECT somefunc() OR true;
</programlisting>
    Note that this is not the same as the left-to-right
    <quote>short-circuiting</quote> of Boolean operators that is found
    in some programming languages.
   </para>

   <para>
    As a consequence, it is unwise to use functions with side effects
    as part of complex expressions.  It is particularly dangerous to
    rely on side effects or evaluation order in <literal>WHERE</> and <literal>HAVING</> clauses,
    since those clauses are extensively reprocessed as part of
    developing an execution plan.  Boolean
    expressions (<literal>AND</>/<literal>OR</>/<literal>NOT</> combinations) in those clauses can be reorganized
    in any manner allowed by the laws of Boolean algebra.
   </para>

   <para>
    When it is essential to force evaluation order, a <literal>CASE</>
    construct (see <xref linkend="functions-conditional">) can be
    used.  For example, this is an untrustworthy way of trying to
    avoid division by zero in a <literal>WHERE</> clause:
<programlisting>
SELECT ... WHERE x &gt; 0 AND y/x &gt; 1.5;
</programlisting>
    But this is safe:
<programlisting>
SELECT ... WHERE CASE WHEN x &gt; 0 THEN y/x &gt; 1.5 ELSE false END;
</programlisting>
    A <literal>CASE</> construct used in this fashion will defeat optimization
    attempts, so it should only be done when necessary.  (In this particular
    example, it would be better to sidestep the problem by writing
    <literal>y &gt; 1.5*x</> instead.)
   </para>
  </sect2>
 </sect1>

 <sect1 id="sql-syntax-calling-funcs">
  <title>Calling Functions</title>

   <indexterm zone="sql-syntax-calling-funcs">
    <primary>notation</primary>
    <secondary>functions</secondary>
   </indexterm>

   <para>
    <productname>PostgreSQL</productname> allows functions that have named
    parameters to be called using either <firstterm>positional</firstterm> or
    <firstterm>named</firstterm> notation.  Named notation is especially
    useful for functions that have a large number of parameters, since it
    makes the associations between parameters and actual arguments more
    explicit and reliable.
    In positional notation, a function call is written with
    its argument values in the same order as they are defined in the function
    declaration.  In named notation, the arguments are matched to the
    function parameters by name and can be written in any order.
   </para>

   <para>
    In either notation, parameters that have default values given in the
    function declaration need not be written in the call at all.  But this
    is particularly useful in named notation, since any combination of
    parameters can be omitted; while in positional notation parameters can
    only be omitted from right to left.
   </para>

   <para>
    <productname>PostgreSQL</productname> also supports
    <firstterm>mixed</firstterm> notation, which combines positional and
    named notation.  In this case, positional parameters are written first
    and named parameters appear after them.
   </para>

   <para>
    The following examples will illustrate the usage of all three
    notations, using the following function definition:
<programlisting>
CREATE FUNCTION concat_lower_or_upper(a text, b text, uppercase boolean DEFAULT false)
RETURNS text
AS
$$
 SELECT CASE
        WHEN $3 THEN UPPER($1 || ' ' || $2)
        ELSE LOWER($1 || ' ' || $2)
        END;
$$
LANGUAGE SQL IMMUTABLE STRICT;
</programlisting>
    Function <function>concat_lower_or_upper</function> has two mandatory
    parameters, <literal>a</literal> and <literal>b</literal>.  Additionally
    there is one optional parameter <literal>uppercase</literal> which defaults
    to <literal>false</literal>.  The <literal>a</literal> and
    <literal>b</literal> inputs will be concatenated, and forced to either
    upper or lower case depending on the <literal>uppercase</literal>
    parameter.  The remaining details of this function
    definition are not important here (see <xref linkend="extend"> for
    more information).
   </para>

   <sect2 id="sql-syntax-calling-funcs-positional">
    <title>Using positional notation</title>

    <indexterm>
     <primary>function</primary>
     <secondary>positional notation</secondary>
    </indexterm>

    <para>
     Positional notation is the traditional mechanism for passing arguments
     to functions in <productname>PostgreSQL</productname>.  An example is:
<screen>
SELECT concat_lower_or_upper('Hello', 'World', true);
 concat_lower_or_upper 
-----------------------
 HELLO WORLD
(1 row)
</screen>
     All arguments are specified in order.  The result is upper case since
     <literal>uppercase</literal> is specified as <literal>true</literal>.
     Another example is:
<screen>
SELECT concat_lower_or_upper('Hello', 'World');
 concat_lower_or_upper 
-----------------------
 hello world
(1 row)
</screen>
     Here, the <literal>uppercase</literal> parameter is omitted, so it
     receives its default value of <literal>false</literal>, resulting in
     lower case output.  In positional notation, arguments can be omitted
     from right to left so long as they have defaults.
    </para>
   </sect2>

   <sect2 id="sql-syntax-calling-funcs-named">
    <title>Using named notation</title>

    <indexterm>
     <primary>function</primary>
     <secondary>named notation</secondary>
    </indexterm>

    <para>
     In named notation, each argument's name is specified using the
     <literal>AS</literal> keyword.  For example:
<screen>
SELECT concat_lower_or_upper('Hello' AS a, 'World' AS b);
 concat_lower_or_upper 
-----------------------
 hello world
(1 row)
</screen>
     Again, the argument <literal>uppercase</literal> was omitted
     so it is set to <literal>false</literal> implicitly.  One advantage of
     using named notation is that the arguments may be specified in any
     order, for example:
<screen>
SELECT concat_lower_or_upper('Hello' AS a, 'World' AS b, true AS uppercase);
 concat_lower_or_upper 
-----------------------
 HELLO WORLD
(1 row)

SELECT concat_lower_or_upper('Hello' AS a, true AS uppercase, 'World' AS b);
 concat_lower_or_upper 
-----------------------
 HELLO WORLD
(1 row)
</screen>
    </para>
   </sect2>

  <sect2 id="sql-syntax-calling-funcs-mixed">
   <title>Using mixed notation</title>

   <indexterm>
    <primary>function</primary>
    <secondary>mixed notation</secondary>
   </indexterm>

   <para>
    The mixed notation combines positional and named notation. However, as
    already mentioned, named arguments cannot precede positional arguments.
    For example:
<screen>
SELECT concat_lower_or_upper('Hello', 'World', true AS uppercase);
 concat_lower_or_upper 
-----------------------
 HELLO WORLD
(1 row)
</screen>
    In the above query, the arguments <literal>a</literal> and
    <literal>b</literal> are specified positionally, while
    <literal>uppercase</> is specified by name.  In this example,
    that adds little except documentation.  With a more complex function
    having numerous parameters that have default values, named or mixed
    notation can save a great deal of writing and reduce chances for error.
   </para>
  </sect2>
 </sect1>

</chapter>
